|
sgfxi: no screens found
Hello.
I just built a new system using the AMD FX8350. My old system was installed on an SSD on an old Core 2 Duo machine, 64-bit. I assumed there would be no problem with the transplant because the Intel 64 bit and AMD 64 bit run on the same kernel architecture. My OS is LMDE. I am using the latest Liquorix kernel unless it's been updated since yesterday. My card is an nVidia GeForce 8400GS, the PCI version (anyways...). On the previous computer it ran perfectly fine. My previous computer would freeze my SSD for no reason if it was the boot device so I installed GRUB on another drive which booted the OS on the SSD. On my new computer this is no longer necessary. So I ran a livecd and tried "grub-install /dev/sda3", and it told me something about blocklists being unreliable and refused to install. On my SSD I have root and home folders as BTRFS, but the /boot directory is ext4. So I installed boot-repair and ran that. Now linux boots and appears to be fully functional. One difference is that the SSD is /dev/sda instead of /dev/sdb. But I checked /etc/fstab and everything seems in order. Problem is, I've run sgfxi numerous times trying different things and I still get this "no screens found" error. I don't know what to do now. I even installed the noveau drivers and I still get the same error. Here is Xorg.0.log: :: Code :: [ 15.843]
X.Org X Server 1.12.4 Release Date: 2012-08-27 [ 15.843] X Protocol Version 11, Revision 0 [ 15.843] Build Operating System: Linux 3.2.0-4-amd64 x86_64 Debian [ 15.843] Current Operating System: Linux ronin 3.7.0-8.dmz.1-liquorix-amd64 #1 ZEN SMP PREEMPT Fri Feb 15 22:48:18 UTC 2013 x86_64 [ 15.843] Kernel command line: BOOT_IMAGE=/vmlinuz-3.7.0-8.dmz.1-liquorix-amd64 root=UUID=3f894376-8f16-4352-a68c-bb8379f8ad75 ro quiet nomodeset nouveau.modeset=0 [ 15.843] Build Date: 05 November 2012 09:49:47AM [ 15.843] xorg-server 2:1.12.4-3 (Julien Cristau <jcristau@debian.org>) [ 15.843] Current version of pixman: 0.26.0 [ 15.843] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 15.843] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 15.843] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 21 23:33:28 2013 [ 15.844] (==) Using config file: "/etc/X11/xorg.conf" [ 15.844] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 15.844] (==) ServerLayout "X.org Configured" [ 15.844] (**) |-->Screen "Screen0" (0) [ 15.844] (**) | |-->Monitor "Monitor0" [ 15.844] (**) | |-->Device "Card0" [ 15.844] (**) |-->Screen "Screen1" (1) [ 15.844] (**) | |-->Monitor "Monitor1" [ 15.844] (**) | |-->Device "Card1" [ 15.844] (**) |-->Screen "Screen2" (2) [ 15.844] (**) | |-->Monitor "Monitor2" [ 15.844] (**) | |-->Device "Card2" [ 15.844] (**) |-->Screen "Screen3" (3) [ 15.844] (**) | |-->Monitor "Monitor3" [ 15.844] (**) | |-->Device "Card3" [ 15.844] (**) |-->Input Device "Mouse0" [ 15.844] (**) |-->Input Device "Keyboard0" [ 15.844] (==) Automatically adding devices [ 15.844] (==) Automatically enabling devices [ 15.844] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 15.844] Entry deleted from font path. [ 15.844] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 15.844] Entry deleted from font path. [ 15.844] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 15.844] Entry deleted from font path. [ 15.844] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 15.844] Entry deleted from font path. [ 15.844] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 15.844] Entry deleted from font path. [ 15.844] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 15.844] Entry deleted from font path. [ 15.844] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 15.845] Entry deleted from font path. [ 15.845] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 15.845] Entry deleted from font path. [ 15.845] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 15.845] Entry deleted from font path. [ 15.845] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 15.845] Entry deleted from font path. [ 15.845] (**) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins, /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins [ 15.845] (**) ModulePath set to "/usr/lib/xorg/modules" [ 15.845] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [ 15.845] (WW) Disabling Mouse0 [ 15.845] (WW) Disabling Keyboard0 [ 15.845] (II) Loader magic: 0x7fcbdb0b0ae0 [ 15.845] (II) Module ABI versions: [ 15.845] X.Org ANSI C Emulation: 0.4 [ 15.845] X.Org Video Driver: 12.1 [ 15.845] X.Org XInput driver : 16.0 [ 15.845] X.Org Server Extension : 6.0 [ 15.845] (--) PCI:*(0:6:0:0) 10de:06e4:196e:05ce rev 161, Mem @ 0xfc000000/16777216, 0xc0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000b000/128, BIOS @ 0x????????/131072 [ 15.845] (II) Open ACPI successful (/var/run/acpid.socket) [ 15.845] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. [ 15.845] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. [ 15.845] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 15.845] (II) "record" will be loaded. This was enabled by default and also specified in the config file. [ 15.845] (II) "dri" will be loaded by default. [ 15.845] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file. [ 15.845] (II) LoadModule: "dbe" [ 15.846] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 15.846] (II) Module dbe: vendor="X.Org Foundation" [ 15.846] compiled for 1.12.4, module version = 1.0.0 [ 15.846] Module class: X.Org Server Extension [ 15.846] ABI class: X.Org Server Extension, version 6.0 [ 15.846] (II) Loading extension DOUBLE-BUFFER [ 15.846] (II) LoadModule: "dri2" [ 15.846] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 15.846] (II) Module dri2: vendor="X.Org Foundation" [ 15.846] compiled for 1.12.4, module version = 1.2.0 [ 15.846] ABI class: X.Org Server Extension, version 6.0 [ 15.846] (II) Loading extension DRI2 [ 15.846] (II) LoadModule: "glx" [ 15.846] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 15.846] (II) Module glx: vendor="X.Org Foundation" [ 15.846] compiled for 1.12.4, module version = 1.0.0 [ 15.846] ABI class: X.Org Server Extension, version 6.0 [ 15.846] (==) AIGLX enabled [ 15.846] (II) Loading extension GLX [ 15.846] (II) LoadModule: "extmod" [ 15.846] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 15.846] (II) Module extmod: vendor="X.Org Foundation" [ 15.846] compiled for 1.12.4, module version = 1.0.0 [ 15.846] Module class: X.Org Server Extension [ 15.846] ABI class: X.Org Server Extension, version 6.0 [ 15.846] (II) Loading extension SELinux [ 15.846] (II) Loading extension MIT-SCREEN-SAVER [ 15.846] (II) Loading extension XFree86-VidModeExtension [ 15.846] (II) Loading extension XFree86-DGA [ 15.846] (II) Loading extension DPMS [ 15.846] (II) Loading extension XVideo [ 15.846] (II) Loading extension XVideo-MotionCompensation [ 15.846] (II) Loading extension X-Resource [ 15.846] (II) LoadModule: "record" [ 15.847] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 15.847] (II) Module record: vendor="X.Org Foundation" [ 15.847] compiled for 1.12.4, module version = 1.13.0 [ 15.847] Module class: X.Org Server Extension [ 15.847] ABI class: X.Org Server Extension, version 6.0 [ 15.847] (II) Loading extension RECORD [ 15.847] (II) LoadModule: "dri" [ 15.847] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 15.847] (II) Module dri: vendor="X.Org Foundation" [ 15.847] compiled for 1.12.4, module version = 1.0.0 [ 15.847] ABI class: X.Org Server Extension, version 6.0 [ 15.847] (II) Loading extension XFree86-DRI [ 15.847] (II) LoadModule: "nouveau" [ 15.847] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 15.847] (II) Module nouveau: vendor="X.Org Foundation" [ 15.847] compiled for 1.12.4, module version = 1.0.1 [ 15.847] Module class: X.Org Video Driver [ 15.847] ABI class: X.Org Video Driver, version 12.1 [ 15.847] (II) NOUVEAU driver Date: Fri Jul 6 16:23:50 2012 +1000 [ 15.847] (II) NOUVEAU driver for NVIDIA chipset families : [ 15.847] RIVA TNT (NV04) [ 15.847] RIVA TNT2 (NV05) [ 15.847] GeForce 256 (NV10) [ 15.847] GeForce 2 (NV11, NV15) [ 15.847] GeForce 4MX (NV17, NV18) [ 15.847] GeForce 3 (NV20) [ 15.847] GeForce 4Ti (NV25, NV28) [ 15.847] GeForce FX (NV3x) [ 15.847] GeForce 6 (NV4x) [ 15.847] GeForce 7 (G7x) [ 15.847] GeForce 8 (G8x) [ 15.847] GeForce GTX 200 (NVA0) [ 15.847] GeForce GTX 400 (NVC0) [ 15.847] (++) using VT number 7 [ 15.853] (EE) No devices detected. [ 15.853] Fatal server error: [ 15.853] no screens found [ 15.853] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 15.853] Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 15.853] And here is xorg.conf: :: Code :: Section "ServerLayout"
Identifier "X.org Configured" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" Screen 2 "Screen2" RightOf "Screen1" Screen 3 "Screen3" RightOf "Screen2" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "dbe" # Load "dri" Load "dri2" Load "glx" Load "extmod" Load "record" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor2" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor3" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "SWcursor" # [<bool>] #Option "HWcursor" # [<bool>] #Option "NoAccel" # [<bool>] #Option "ShadowFB" # [<bool>] #Option "VideoKey" # <i> #Option "WrappedFB" # [<bool>] #Option "GLXVBlank" # [<bool>] #Option "ZaphodHeads" # <str> #Option "PageFlip" # [<bool>] #Option "SwapLimit" # <i> Identifier "Card0" Driver "nouveau" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Card1" Driver "nouveau" BusID "PCI:1:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "Rotate" # <str> #Option "fbdev" # <str> #Option "debug" # [<bool>] Identifier "Card2" Driver "nouveau" BusID "PCI:1:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "DefaultRefresh" # [<bool>] #Option "ModeSetClearScreen" # [<bool>] Identifier "Card3" Driver "nouveau" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Card1" Monitor "Monitor1" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Card2" Monitor "Monitor2" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen3" Device "Card3" Monitor "Monitor3" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Extensions" # Option "Composite" "disable" # Option "RENDER" "disable" EndSection Back to top |
|
Grub2 kernel command line:
:: Code ::
GRUB_CMDLINE_LINUX_DEFAULT="quiet nomodeset nouveau.modeset=0" GRUB_CMDLINE_LINUX="" Back to top |
|
to test nouveau, do this: sgfxi -N nouveau
then mv /etc/X11/xorg.conf to something else, like xorg.conf-full then reboot. If you let x do its thing with no xorg usually it will work. no screens found almost always means an error in your xorg.conf If you run Xorg -configure it will create a new xorg.conf file which you then can move to /etc/X11 and try that, rebooting I find helps too. But you can be fairly certain it's your xorg.conf file. The fact that you seem surprised that a dynamically set path like "One difference is that the SSD is /dev/sda instead of /dev/sdb" suggests you may not be fully clear on how the linux kernel works, you should NEVER use hard coded /dev paths anywhere in your system, with one exception: /dev/disk/by-label/disk-label or /dev/disk/by-uuid/uuiud numbers string. However, that's not related to x not finding your screen, that error is almost always xorg.conf error. mv /cp your old one and first try with no xorg.conf at all after running sgfxi to install nouveau, which will also remove all blacklisting and rebuild the initrd image, then see if you get your desktop with nouveau, if you do, you know your xorg.conf file is to blame. Then regenerate a new one and put that in /etc/X11/ then reboot to see if that works with nouveau, if it does, the main issue is resolved, then run sgfxi to reinstall the video driver, if it works, there are issues with 3.8 nvidia right now though and a patch I just added may or may not fix it. Back to top |
|
Thanks a lot!
I'm definitely not fully clear on how Linux works. I've had a hard time figuring out how to approach it, and to find the time. I'm gradually picking things up, but I need to do some study; I just don't know where to find the information explained concisely. BTW, that was me accidentally posting the sfxi log in in the other thread. I deleted it immediately. Back to top |
|
It worked! Thanks a lot! I had already suspected it was a botched Xorg.conf, but I was not confident enough to even try...
For some reason my motherboard won't recognize my PCIe graphics card though. It's a 7600GS. Any idea on what motherboard settings could affect this? In the Bios it had options for PCIe spread spectrum, and PCIe speed (100-150). Back to top |
|
show: inxi -bxx
after updating inxi with: inxi -U as root. some amd motherboards do not play well with nvidia cards. Back to top |
|
:: Code :: $ inxi -bxx
System: Host: ronin Kernel: 3.7.0-8.dmz.1-liquorix-amd64 x86_64 (64 bit, gcc: 4.7.2) Desktop: Cinnamon 1.6.7 (Gtk 2.24.10) dm: mdm Distro: Linux Mint Debian Edition Machine: Mobo: ASUSTeK model: M5A99X EVO version: Rev 1.xx Bios: American Megatrends version: 1604 date: 10/16/2012 CPU: Octa core AMD FX-8350 Eight-Core (-MCP-) clocked at 4000.00 MHz Graphics: Card: NVIDIA G98 [GeForce 8400 GS] bus-ID: 06:00.0 chip-ID: 10de:06e4 X.Org: 1.12.4 driver: nvidia Resolution: 1280x960@60.0hz GLX Renderer: GeForce 8400 GS/PCIe/SSE2 GLX Version: 3.3.0 NVIDIA 313.18 Direct Rendering: Yes Network: Card: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver: r8169 ver: 2.3LK-NAPI port: e000 bus-ID: 01:00.0 chip-ID: 10ec:8168 Drives: HDD Total Size: 132.2GB (39.1% used) Info: Processes: 305 Uptime: 5 min Memory: 1944.8/7924.1MB Runlevel: 2 Gcc sys: 4.7.2 alt: 4.4/4.6 Client: Shell (bash 4.2.36 running in gnome-terminal) inxi: 1.8.38 Back to top |
|
mobo has amd chipset, as I suspected. Sometimes specific cards just don't work, google the motherboard brand/model and the word nvidia and linux and maybe you'll find the issue, or not.
Back to top |
|
Well, I held my breath and plugged the graphics card into the very last PCIe slot. And it worked! Strange.
But now I have another problem. When I used sgfxi for the first card, it told me the kernel headers weren't installed. They were, but I ran smxi and resinstalled the kernel. Then it worked. This time, no matter what I do, sgfxi ends telling me there was either an error, or it does that but includes the driver error text. sgfxi.log: :: Code ::
========================================================= START sgfxi LOGGING: ========================================================= Script started: 2013-02-22-17:57:06 Video Card Information: NVIDIA Corporation G98 [GeForce 8400 GS] (rev a1) NVIDIA Corporation G73 [GeForce 7600 GS] (rev a1) Video Card Type: 10de Video Card Number: 0392 Xorg Version: 1.12 Installing driver to kernel: 3.7.0-6.dmz.2-liquorix-amd64 sgfxi script version: 4.20.26 sgfxi start options: SYSTEM_BASE: debian SYSTEM_CODENAME: testing DISTRIB_CODENAME: debian DISTRIB_ID: linuxmint DISTRIB_RELEASE: 1 SIS: linuxmint-debian-64 BITS: 64 FG_DISTRIB_CODENAME: sid FG_DISTRIB_ID: Debian APT_TYPE: apt-get ========================================================= X is Running: false Current Runlevel: 2 Connection is live (0=true): 0 ========================================================= INSTALL_TO_KERNEL: KERNEL_FULL: 3.7.0-6.dmz.2-liquorix-amd64 KERNEL_BASE: 3 KERNEL_NUMBER: 3.7 KERNEL_MATH: 7 B_IS_XEN: true Function: create_x_conf - Primary: Start xorg is present with xorg.conf file Function: create_x_conf - Primary: End Function: check_package_manager_updated - Utility: Start sizeWorking: 33 Function: check_package_manager_updated - Utility: End Function: check_supported_driver - Utility: Start Function: check_supported_driver - Utility: End Function: set_cpu_data - Utility: Start BITS: 64 - arch: _64 Function: set_cpu_data - Utility: End Function: set_driver_install_version - Primary: Start Function: check_supported_driver - Utility: Start Args: last-check Function: check_supported_driver - Utility: End Function: print_information_continue - Utility: Start Args: standard The graphics installer will be installing the nvidia driver: 304.64 Function: print_information_continue - Utility: End Installing this driver: 304.64 Function: set_driver_install_version - Primary: End Function: driver_support_tests - Utility: Start Args: supported-driver Function: driver_support_tests - Utility: End Function: check_kernel_headers - Utility: Start Function: check_package_status - Utility: Start Args: linux-headers-3.7.0-6.dmz.2-liquorix-amd64 i Package Version: Function: check_package_status - Utility: End Function: check_package_status - Utility: Start Args: linux-headers-3.7.0-6.dmz.2-liquorix-amd64 c Package Version: Function: check_package_status - Utility: End headerName: linux-headers-3.7.0-6.dmz.2-liquorix-amd64 headerInstalled: headerAvailable: headerFile: ERROR: (224) Your system is missing the required kernel header package: linux-headers-3.7.0-6.dmz.2-liquorix-amd64 and it is not currently available in your repos. Cannot continue. Please either update your kernel and kernel headers, or find and install kernel headers for 3.7.0-6.dmz.2-liquorix-amd64 You can override this test with -! 6 option. If install works, let maintainer know. ========================================================= START sgfxi LOGGING: ========================================================= Script started: 2013-02-22-18:06:25 Video Card Information: NVIDIA Corporation G98 [GeForce 8400 GS] (rev a1) NVIDIA Corporation G73 [GeForce 7600 GS] (rev a1) Video Card Type: 10de Video Card Number: 0392 Xorg Version: 1.12 Installing driver to kernel: 3.7.0-8.dmz.1-liquorix-amd64 sgfxi script version: 4.20.26 sgfxi start options: SYSTEM_BASE: debian SYSTEM_CODENAME: testing DISTRIB_CODENAME: debian DISTRIB_ID: linuxmint DISTRIB_RELEASE: 1 SIS: linuxmint-debian-64 BITS: 64 FG_DISTRIB_CODENAME: sid FG_DISTRIB_ID: Debian APT_TYPE: apt-get ========================================================= X is Running: true Current Runlevel: 2 Connection is live (0=true): 0 ========================================================= INSTALL_TO_KERNEL: KERNEL_FULL: 3.7.0-8.dmz.1-liquorix-amd64 KERNEL_BASE: 3 KERNEL_NUMBER: 3.7 KERNEL_MATH: 7 B_IS_XEN: true Function: create_x_conf - Primary: Start xorg is present with xorg.conf file Function: create_x_conf - Primary: End Function: check_package_manager_updated - Utility: Start sizeWorking: 33 Function: check_package_manager_updated - Utility: End Function: check_supported_driver - Utility: Start Function: check_supported_driver - Utility: End Function: set_cpu_data - Utility: Start BITS: 64 - arch: _64 Function: set_cpu_data - Utility: End Function: set_driver_install_version - Primary: Start Function: check_supported_driver - Utility: Start Args: last-check Function: check_supported_driver - Utility: End Function: print_information_continue - Utility: Start Args: standard The graphics installer will be installing the nvidia driver: 304.64 Function: print_information_continue - Utility: End Installing this driver: 304.64 Function: set_driver_install_version - Primary: End Function: driver_support_tests - Utility: Start Args: supported-driver Function: driver_support_tests - Utility: End Function: check_kernel_headers - Utility: Start Function: check_package_status - Utility: Start Args: linux-headers-3.7.0-8.dmz.1-liquorix-amd64 i Package Version: 3.7.0-13 Function: check_package_status - Utility: End Function: check_package_status - Utility: Start Args: linux-headers-3.7.0-8.dmz.1-liquorix-amd64 c Package Version: 3.7.0-13 Function: check_package_status - Utility: End headerName: linux-headers-3.7.0-8.dmz.1-liquorix-amd64 headerInstalled: 3.7.0-13 headerAvailable: 3.7.0-13 headerFile: /usr/src/sm-kernel-downloads/3.7.0-8.dmz.1-liquorix-amd64/linux-headers-3.7.0-8.dmz.1-liquorix-amd64_3.7.0-13_amd64.deb Function: check_kernel_headers - Utility: End Function: check_run_package_tools - Primary: Start Function: check_run_package_tools - Primary: End Function: set_download_info - Primary: Start download url: ftp://download.nvidia.com/XFree86/Linux-x86_64/304.64/ - driver file: NVIDIA-Linux-x86_64-304.64 Function: set_download_info - Primary: End Function: test_module_build_ok - Primary: Start Args: return Function: list_installed_packages - Utility: Start Args: nvidia (libkwinnvidiahack|libgl1-nvidia-glx-ia32|modalias|libvdpau) packageList: Function: list_installed_packages - Utility: End returnValue: 3 Error Data: No Installed Nvidia: Function: download_extract_driver - Primary: Start Args: ftp://download.nvidia.com/XFree86/Linux-x86_64/304.64/ NVIDIA-Linux-x86_64-304.64 Function: pre_extract_clean_set_up - Utility: Start Args: NVIDIA-Linux-x86_64-304.64 Function: pre_extract_clean_set_up - Utility: End Creating directory NVIDIA-Linux-x86_64-304.64 Verifying archive integrity... OK Uncompressing NVIDIA Accelerated Graphics Driver for Linux-x86_64 304.64................................................................................................................................................................ Function: download_extract_driver - Primary: End Function: set_install_directory - set to: /usr/src/sgfxi-downloads/NVIDIA-Linux-x86_64-304.64 Function: run_driver_patches - Primary: Start Function: run_prepatch_fixes - Primary: Start Args: 3.7-path-fix Target file exists: /usr/src/linux-headers-3.7.0-8.dmz.1-liquorix-amd64/include/linux/version.h Function: run_prepatch_fixes - Primary: End Function: apply_patch_file - Utility: Start Args: NVIDIA_304_60-64_3.7-3.8.patch Patch File Dir: /usr/src/sgfxi-downloads/NVIDIA-Linux-x86_64-304.64 Patch URL: http://smxi.org/sg/patches/NVIDIA_304_60-64_3.7-3.8.patch Function: apply_patch_file - Utility: End Function: run_driver_patches - Primary: End Function: x_start_stop_master - Primary: Start Args: stop Function: start_stop_x - Utility: Start Args: stop default runlevel: 2 current runlevel: 2 dmanCommand: service mdm stop Function: x_is_running - Utility: Start xIsRunning: false Function: x_is_running - Utility: End Function: start_stop_x - Utility: End Function: x_start_stop_master - Primary: End Function: check_driver_install_tools - Primary: Start Function: check_package_status - Utility: Start Args: module-assistant i Package Version: 0.11.4 Function: check_package_status - Utility: End Function: check_package_status - Utility: Start Args: build-essential i Package Version: 11.5 Function: check_package_status - Utility: End Function: check_driver_install_tools - Primary: End Function: prep_install - Primary: Start Function: prep_install - Primary: End Function: preinstall_cleanup - Primary: Start Pre Remove: nvidia.ko files: Function: list_installed_packages - Utility: Start Args: nvidia (libkwinnvidiahack|libgl1-nvidia-glx-ia32|modalias|libvdpau|nvidia-bl-dkms|nvidia-cg-toolkit) packageList: Function: list_installed_packages - Utility: End Post Purge/Remove: nvidia.ko files: rm: cannot remove `/usr/src/nvidia-310.19': Is a directory rm: cannot remove `/usr/src/nvidia-313.18': Is a directory rm: cannot remove `/usr/src/sgfxi-downloads/nvidia-173.14.35': Is a directory Function: remove_module - Primary: Start Args: nvidia operation outcome: unset Function: remove_module - Primary: End Function: remove_module - Primary: Start Args: nouveau operation outcome: removed Function: set_modesetting_off - Primary: End Function: add_grub_nomodeset_blacklist_item - Utility: Start Args: nouveau Function: get_active_grub_files - Utility: Start grub files: /boot/grub/grub.cfg /etc/default/grub Function: get_active_grub_files - Utility: End Function: add_grub_nomodeset_blacklist_item - Utility: End Function: add_modprobe_d_blacklist_item - Utility: Start Args: nouveau Function: add_modprobe_d_blacklist_item - Utility: End Function: set_modesetting_off - Primary: Start Args: nouveau removed Function: remove_module - Primary: End Function: list_installed_packages - Utility: Start Args: fglrx modalias packageList: Function: list_installed_packages - Utility: End Function: remove_module - Primary: Start Args: fglrx operation outcome: unset Function: remove_module - Primary: End Function: clean_dkms - Primary: Start Function: clean_dkms - Primary: End Function: preinstall_cleanup - Primary: End Function: run_driver_installer - Primary: Start driver: 304.64 ERROR: If you are using a Linux 2.4 kernel, please make sure you either have configured kernel sources matching your kernel or the correct set of kernel headers installed on your system. If you are using a Linux 2.6 kernel, please make sure you have configured kernel sources matching your kernel installed on your system. If you specified a separate output directory using either the "KBUILD_OUTPUT" or the "O" KBUILD parameter, make sure to specify this directory with the SYSOUT environment variable or with the equivalent nvidia-installer command line option. Depending on where and how the kernel sources (or the kernel headers) were installed, you may need to specify their location with the SYSSRC environment variable or the equivalent nvidia-installer command line option. ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at www.nvidia.com. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Error logs from nvidia install: - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - nvidia-installer log file '/var/log/nvidia-installer.log' creation time: Fri Feb 22 18:06:29 2013 installer version: 304.64 PATH: /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin nvidia-installer command line: ./nvidia-installer -s -N --x-module-path=/usr/lib/xorg/modules --x-library-path=/usr/lib -k 3.7.0-8.dmz.1-liquorix-amd64 Using built-in stream user interface -> License accepted by command line option. -> Installing NVIDIA driver version 304.64. -> Not probing for precompiled kernel interfaces. -> Performing CC sanity check with CC="/usr/bin/gcc-4.7". -> Kernel source path: '/lib/modules/3.7.0-8.dmz.1-liquorix-amd64/build' -> Kernel output path: '/lib/modules/3.7.0-8.dmz.1-liquorix-amd64/build' ERROR: If you are using a Linux 2.4 kernel, please make sure you either have configured kernel sources matching your kernel or the correct set of kernel headers installed on your system. If you are using a Linux 2.6 kernel, please make sure you have configured kernel sources matching your kernel installed on your system. If you specified a separate output directory using either the "KBUILD_OUTPUT" or the "O" KBUILD parameter, make sure to specify this directory with the SYSOUT environment variable or with the equivalent nvidia-installer command line option. Depending on where and how the kernel sources (or the kernel headers) were installed, you may need to specify their location with the SYSSRC environment variable or the equivalent nvidia-installer command line option. ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at www.nvidia.com. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ERROR: (245) The nvidia installer exited with the error: 1 A copy of this driver installer error log is also here: /var/log/sgfxi/sgfxi.log Also, the nouveau drivers give me a full-resolution TTY console on startup. Can I get sgfxi to do this? Back to top |
|
I've been having issues with this MB.
When I enable power saving, the intenet connection goes. Randomly at startup or while in use I'll start having USB I/O errors which will freeze the system. Linux reports hardware/firmware errors (something about AMD Vi) and is unstable with I/O errors if I enable IOMMU. I've gotten it down to a set of settings that seems to work, but I still have this "SP5100: mmio address already in use" error, and it still has USB problems. This is strange since this MB uses an SB950, not an SP5100 (maybe the SP5100 driver runs both?). I am going to RMA this MB and get another one. I'm hoping that the EVO R2.0 has some kinks worked out. Back to top |
|
All times are GMT - 8 Hours |