Page: Previous  1, 2, 3, 4, 5

arclance
Status: Interested
Joined: 26 May 2012
Posts: 41
Reply Quote
:: techAdmin wrote ::
Again, from now on post ALL relevant data until we pin down which kernels are failing and why.

It is hard to answer all your questions if you keep making new posts or editing them while I am responding to them.

:: techAdmin wrote ::

If you post further in this thread, post the results, each time, for your installed kernel with the ls of /usr/src kernel I posted above

I already ran the commands and told you the result, they are there i.e. not missing.
:: arclance wrote ::

I have the "version.h" link, I am using Liquorix so I already have it, adding "-f" changes nothing.

:: Code ::

ls /usr/src/linux-headers-$(uname -r)/include/generated/uapi/linux
version.h
ls /usr/src/linux-headers-$(uname -r)/include/linux | grep version
version.h

If you want me to post the results of the commands themselves ask for that specifically.
I had to check them manually for the 3.7.6, 3.7.8, and 3.7.9 kernels anyway since I am booted into 3.7.5 right now.
The link is there for all of them, no doubt because I am using Liquorix.

:: techAdmin wrote ::

post: inxi -SCx so I can see your system at a glance.

Here you go, now that I know what specific options you want I can give you what you want.
This is the computer that I still have 313.18 installed on the 3.7.8 Liquorix kernel.
:: Code ::

inxi -SCx
System:    Host TheForge Kernel 3.7.8-zen.liquorix.3.7.0-8.1-arc.1 x86_64 (64 bit) Distro CrunchBang Linux statler
CPU:       Dual core Intel Core2 6420 (-MCP-) cache 4096 KB flags (lm nx sse sse2 sse3 ssse3 vmx) bmips 8511.6
           Clock Speeds: (1) 2127.903 MHz (2) 2127.903 MHz

I installed it with the older version of sgfxi, 4.20.26, six days ago.

This is my other computer, the one that won't install 313.18 on a 3.7 kernel higher than 3.7.5.
:: Code ::

System:    Host The-Hammer Kernel 3.7.5-zen.liquorix.3.7.0-5.1-arc.1 x86_64 (64 bit) Distro CrunchBang Linux statler
CPU:       Quad core Intel Core i7-2600K (-HT-MCP-) cache 8192 KB flags (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips 27290.8
           Clock Speeds: (1) 1600.00 MHz (2) 1600.00 MHz (3) 1600.00 MHz (4) 1600.00 MHz (5) 1600.00 MHz (6) 1600.00 MHz (7) 1600.00 MHz (8) 1600.00 MHz

I had successfully installed 313.18 on the Liquorix 3.7.8 kernel on this computer as well with sgfxi 4.20.26 at the same time as on the other one.
When I updated to 3.7.9 on this computer I was unable to install 313.18 on that kernel even with "-f".
I rebooted to 3.7.8 and was unable to install 313.18 on it anymore.
Then I tired 3.7.6 and it failed as well.
All three failed with the
:: Code ::

ERROR: If you are using a Linux 2.4 kernel, please make sure
you either have configured kernel sources matching your
kernel or the correct set of kernel headers installed
on your system.

If you are using a Linux 2.6 kernel, please make sure
you have configured kernel sources matching your kernel
installed on your system. If you specified a separate
output directory using either the "KBUILD_OUTPUT" or
the "O" KBUILD parameter, make sure to specify this
directory with the SYSOUT environment variable or with
the equivalent nvidia-installer command line option.

Depending on where and how the kernel sources (or the
kernel headers) were installed, you may need to specify
their location with the SYSSRC environment variable or
the equivalent nvidia-installer command line option.

error.
This is the whole sgfxi log for the 3.7.9 kernel.
:: Code ::

=========================================================
START sgfxi LOGGING:
=========================================================
Script started: 2013-02-27-15:13:51
Video Card Information: NVIDIA Corporation GF114 [GeForce GTX 560 Ti] (rev a1)
Video Card Type: 10de
Video Card Number: 1200
Xorg Version: 1.12
Installing driver to kernel: 3.7.9-zen.liquorix.3.7.0-9.2-arc.1
sgfxi script version: 4.20.29
sgfxi start options:  -f
SYSTEM_BASE: debian
SYSTEM_CODENAME: sid
DISTRIB_CODENAME: sid
DISTRIB_ID: crunchbang
DISTRIB_RELEASE:
SIS: crunchbang-sid-64
BITS: 64
FG_DISTRIB_CODENAME: sid
FG_DISTRIB_ID: Debian
APT_TYPE: apt-get
=========================================================
X is Running: false
Current Runlevel: 2
Connection is live (0=true): 0
=========================================================
INSTALL_TO_KERNEL:
KERNEL_FULL: 3.7.9-zen.liquorix.3.7.0-9.2-arc.1
KERNEL_BASE: 3
KERNEL_NUMBER: 3.7
KERNEL_MATH: 7
B_IS_XEN: true
Function: create_x_conf - Primary: Start
  xorg is present with xorg.conf file
Function: create_x_conf - Primary: End
Function: check_package_manager_updated - Utility: Start
  sizeWorking: 63
Function: check_package_manager_updated - Utility: End
Function: check_supported_driver - Utility: Start
Function: check_supported_driver - Utility: End
Function: set_cpu_data - Utility: Start
  BITS: 64 - arch: _64
Function: set_cpu_data - Utility: End
Function: set_driver_install_version - Primary: Start
Function: check_supported_driver - Utility: Start
  Args: last-check
Function: check_supported_driver - Utility: End
Function: print_information_continue - Utility: Start
  Args: info You are using the following options:
 -f - You are using the forced override option. This will bypass kernel module
 check/build and force reinstall of your driver (nVidia only).

Function: print_information_continue - Utility: End
Function: print_information_continue - Utility: Start
  Args: standard The graphics installer will be installing the nvidia driver: 313.18
Function: print_information_continue - Utility: End
  Installing this driver: 313.18
Function: set_driver_install_version - Primary: End
Function: driver_support_tests - Utility: Start
  Args: supported-driver
Function: driver_support_tests - Utility: End
Function: check_kernel_headers - Utility: Start
Function: check_package_status - Utility: Start
  Args: linux-headers-3.7.9-zen.liquorix.3.7.0-9.2-arc.1 i
  Package Version: 3.7.9-zen.liquorix.3.7.0-9.2-arc.1-10.00.Custom
Function: check_package_status - Utility: End
Function: check_package_status - Utility: Start
  Args: linux-headers-3.7.9-zen.liquorix.3.7.0-9.2-arc.1 c
  Package Version:
Function: check_package_status - Utility: End
  headerName: linux-headers-3.7.9-zen.liquorix.3.7.0-9.2-arc.1
headerInstalled: 3.7.9-zen.liquorix.3.7.0-9.2-arc.1-10.00.Custom
headerAvailable:
headerFile:
Function: check_kernel_headers - Utility: End
Function: check_run_package_tools - Primary: Start
Function: check_run_package_tools - Primary: End
Function: set_download_info - Primary: Start
  download url: ftp://download.nvidia.com/XFree86/Linux-x86_64/313.18/ - driver file: NVIDIA-Linux-x86_64-313.18
Function: set_download_info - Primary: End
Function: download_extract_driver - Primary: Start
  Args: ftp://download.nvidia.com/XFree86/Linux-x86_64/313.18/ NVIDIA-Linux-x86_64-313.18
Function: pre_extract_clean_set_up - Utility: Start
  Args: NVIDIA-Linux-x86_64-313.18
Function: pre_extract_clean_set_up - Utility: End
Creating directory NVIDIA-Linux-x86_64-313.18
Verifying archive integrity... OK
Uncompressing NVIDIA Accelerated Graphics Driver for Linux-x86_64 313.18...........................................................................................................................................................
Function: download_extract_driver - Primary: End
  Function: set_install_directory - set to: /usr/src/sgfxi-downloads/NVIDIA-Linux-x86_64-313.18
Function: run_driver_patches - Primary: Start
Function: run_prepatch_fixes - Primary: Start
  Args: 3.7-path-fix
  Target file exists: /usr/src/linux-headers-3.7.9-zen.liquorix.3.7.0-9.2-arc.1/include/linux/version.h
Function: run_prepatch_fixes - Primary: End
Function: run_driver_patches - Primary: End
Function: x_start_stop_master - Primary: Start
  Args: stop
Function: start_stop_x - Utility: Start
  Args: stop
  default runlevel: 2
current runlevel: 2
  dmanCommand: service gdm stop
Function: x_is_running - Utility: Start
  xIsRunning: false
Function: x_is_running - Utility: End
Function: start_stop_x - Utility: End
Function: x_start_stop_master - Primary: End
Function: check_driver_install_tools - Primary: Start
Function: check_package_status - Utility: Start
  Args: module-assistant i
  Package Version: 0.11.4
Function: check_package_status - Utility: End
Function: check_package_status - Utility: Start
  Args: build-essential i
  Package Version: 11.6
Function: check_package_status - Utility: End
Function: check_driver_install_tools - Primary: End
Function: prep_install - Primary: Start
Function: prep_install - Primary: End
Function: preinstall_cleanup - Primary: Start
  Pre Remove: nvidia.ko files:

Function: list_installed_packages - Utility: Start
  Args: nvidia (libkwinnvidiahack|libgl1-nvidia-glx-ia32|modalias|libvdpau|nvidia-bl-dkms|nvidia-cg-toolkit)
  packageList:
Function: list_installed_packages - Utility: End
  Post Purge/Remove: nvidia.ko files:

Function: remove_module - Primary: Start
  Args: nvidia
  operation outcome: unset
Function: remove_module - Primary: End
Function: remove_module - Primary: Start
  Args: nouveau
  operation outcome: unset
Function: set_modesetting_off - Primary: End
Function: add_grub_nomodeset_blacklist_item - Utility: Start
  Args: nouveau
Function: get_active_grub_files - Utility: Start
  grub files:  /boot/grub/grub.cfg /etc/default/grub
Function: get_active_grub_files - Utility: End
Function: add_grub_nomodeset_blacklist_item - Utility: End
Function: add_modprobe_d_blacklist_item - Utility: Start
  Args: nouveau
Function: add_modprobe_d_blacklist_item - Utility: End
Function: set_modesetting_off - Primary: Start
  Args: nouveau unset
Function: remove_module - Primary: End
Function: list_installed_packages - Utility: Start
  Args: fglrx modalias
  packageList:
Function: list_installed_packages - Utility: End
Function: remove_module - Primary: Start
  Args: fglrx
  operation outcome: unset
Function: remove_module - Primary: End
Function: clean_dkms - Primary: Start
Function: clean_dkms - Primary: End
Function: preinstall_cleanup - Primary: End
Function: run_driver_installer - Primary: Start
  driver: 313.18

ERROR: If you are using a Linux 2.4 kernel, please make sure
       you either have configured kernel sources matching your
       kernel or the correct set of kernel headers installed
       on your system.
       
       If you are using a Linux 2.6 kernel, please make sure
       you have configured kernel sources matching your kernel
       installed on your system. If you specified a separate
       output directory using either the "KBUILD_OUTPUT" or
       the "O" KBUILD parameter, make sure to specify this
       directory with the SYSOUT environment variable or with
       the equivalent nvidia-installer command line option.
       
       Depending on where and how the kernel sources (or the
       kernel headers) were installed, you may need to specify
       their location with the SYSSRC environment variable or
       the equivalent nvidia-installer command line option.


ERROR: Installation has failed.  Please see the file
       '/var/log/nvidia-installer.log' for details.  You may find
       suggestions on fixing installation problems in the README available
       on the Linux driver download page at www.nvidia.com.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Error logs from nvidia install:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Wed Feb 27 15:14:04 2013
installer version: 313.18

PATH: /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin

nvidia-installer command line:
    ./nvidia-installer
    -s
    -N
    --x-module-path=/usr/lib/xorg/modules
    --x-library-path=/usr/lib
    -k
    3.7.9-zen.liquorix.3.7.0-9.2-arc.1

Using built-in stream user interface
-> License accepted by command line option.
-> Installing NVIDIA driver version 313.18.
-> Would you like to register the kernel module sources with DKMS? This will allow DKMS to automatically build a new module, if you install a different kernel later. (Answer: No)
-> Not probing for precompiled kernel interfaces.
-> Performing CC sanity check with CC="/usr/bin/gcc-4.7".
-> Kernel source path: '/lib/modules/3.7.9-zen.liquorix.3.7.0-9.2-arc.1/source'
-> Kernel output path: '/lib/modules/3.7.9-zen.liquorix.3.7.0-9.2-arc.1/build'
ERROR: If you are using a Linux 2.4 kernel, please make sure
you either have configured kernel sources matching your
kernel or the correct set of kernel headers installed
on your system.

If you are using a Linux 2.6 kernel, please make sure
you have configured kernel sources matching your kernel
installed on your system. If you specified a separate
output directory using either the "KBUILD_OUTPUT" or
the "O" KBUILD parameter, make sure to specify this
directory with the SYSOUT environment variable or with
the equivalent nvidia-installer command line option.

Depending on where and how the kernel sources (or the
kernel headers) were installed, you may need to specify
their location with the SYSSRC environment variable or
the equivalent nvidia-installer command line option.
ERROR: Installation has failed.  Please see the file '/var/log/nvidia-installer.log' for details.  You may find suggestions on fixing installation problems in the README available on the Linux driver download page at www.nvidia.com.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  ERROR: (245) The nvidia installer exited with the error: 1
A copy of this driver installer error log is also here: /var/log/sgfxi/sgfxi.log
=========================================================
START sgfxi LOGGING:
=========================================================
Script started: 2013-02-27-15:14:58
Video Card Information: NVIDIA Corporation GF114 [GeForce GTX 560 Ti] (rev a1)
Video Card Type: 10de
Video Card Number: 1200
Xorg Version: 1.12
Installing driver to kernel: 3.7.9-zen.liquorix.3.7.0-9.2-arc.1
sgfxi script version: 4.20.29
sgfxi start options:  -B -C
SYSTEM_BASE: debian
SYSTEM_CODENAME: sid
DISTRIB_CODENAME: sid
DISTRIB_ID: crunchbang
DISTRIB_RELEASE:
SIS: crunchbang-sid-64
BITS: 64
FG_DISTRIB_CODENAME: sid
FG_DISTRIB_ID: Debian
APT_TYPE: apt-get
=========================================================
X is Running: false
Current Runlevel: 2
Connection is live (0=true): 0
=========================================================
INSTALL_TO_KERNEL:
KERNEL_FULL: 3.7.9-zen.liquorix.3.7.0-9.2-arc.1
KERNEL_BASE: 3
KERNEL_NUMBER: 3.7
KERNEL_MATH: 7
B_IS_XEN: true
Function: create_x_conf - Primary: Start
  xorg is present with xorg.conf file
Function: create_x_conf - Primary: End
Function: check_package_manager_updated - Utility: Start
  sizeWorking: 63
Function: check_package_manager_updated - Utility: End
Function: check_supported_driver - Utility: Start
Function: check_supported_driver - Utility: End
Function: set_cpu_data - Utility: Start
  BITS: 64 - arch: _64
Function: set_cpu_data - Utility: End
Function: set_driver_install_version - Primary: Start
Function: check_supported_driver - Utility: Start
  Args: last-check
Function: check_supported_driver - Utility: End
Function: print_information_continue - Utility: Start
  Args: info You are using the following options:
 -B - Use Beta Driver (nVidia only. Only if available)
 -C - Xorg.conf will not be modified by this script.

Function: print_information_continue - Utility: End
Function: print_information_continue - Utility: Start
  Args: standard The graphics installer will be installing the nvidia driver: 313.18
There is no current beta driver for your nvidia card type.
Using the current stable driver instead.

Function: print_information_continue - Utility: End
  Installing this driver: 313.18
Function: set_driver_install_version - Primary: End
Function: driver_support_tests - Utility: Start
  Args: supported-driver
Function: driver_support_tests - Utility: End
Function: check_kernel_headers - Utility: Start
Function: check_package_status - Utility: Start
  Args: linux-headers-3.7.9-zen.liquorix.3.7.0-9.2-arc.1 i
  Package Version: 3.7.9-zen.liquorix.3.7.0-9.2-arc.1-10.00.Custom
Function: check_package_status - Utility: End
Function: check_package_status - Utility: Start
  Args: linux-headers-3.7.9-zen.liquorix.3.7.0-9.2-arc.1 c
  Package Version:
Function: check_package_status - Utility: End
  headerName: linux-headers-3.7.9-zen.liquorix.3.7.0-9.2-arc.1
headerInstalled: 3.7.9-zen.liquorix.3.7.0-9.2-arc.1-10.00.Custom
headerAvailable:
headerFile:
Function: check_kernel_headers - Utility: End
Function: check_run_package_tools - Primary: Start
Function: check_run_package_tools - Primary: End
Function: set_download_info - Primary: Start
  download url: ftp://download.nvidia.com/XFree86/Linux-x86_64/313.18/ - driver file: NVIDIA-Linux-x86_64-313.18
Function: set_download_info - Primary: End
Function: test_module_build_ok - Primary: Start
  Args: return
Function: list_installed_packages - Utility: Start
  Args: nvidia (libkwinnvidiahack|libgl1-nvidia-glx-ia32|modalias|libvdpau)
  packageList:
Function: list_installed_packages - Utility: End
  returnValue: 3
Error Data: No Installed Nvidia:
Function: download_extract_driver - Primary: Start
  Args: ftp://download.nvidia.com/XFree86/Linux-x86_64/313.18/ NVIDIA-Linux-x86_64-313.18
Function: pre_extract_clean_set_up - Utility: Start
  Args: NVIDIA-Linux-x86_64-313.18
Function: pre_extract_clean_set_up - Utility: End
Creating directory NVIDIA-Linux-x86_64-313.18
Verifying archive integrity... OK
Uncompressing NVIDIA Accelerated Graphics Driver for Linux-x86_64 313.18...........................................................................................................................................................
Function: download_extract_driver - Primary: End
  Function: set_install_directory - set to: /usr/src/sgfxi-downloads/NVIDIA-Linux-x86_64-313.18
Function: run_driver_patches - Primary: Start
Function: run_prepatch_fixes - Primary: Start
  Args: 3.7-path-fix
  Target file exists: /usr/src/linux-headers-3.7.9-zen.liquorix.3.7.0-9.2-arc.1/include/linux/version.h
Function: run_prepatch_fixes - Primary: End
Function: run_driver_patches - Primary: End
Function: x_start_stop_master - Primary: Start
  Args: stop
Function: start_stop_x - Utility: Start
  Args: stop
  default runlevel: 2
current runlevel: 2
  dmanCommand: service gdm stop
Function: x_is_running - Utility: Start
  xIsRunning: false
Function: x_is_running - Utility: End
Function: start_stop_x - Utility: End
Function: x_start_stop_master - Primary: End
Function: check_driver_install_tools - Primary: Start
Function: check_package_status - Utility: Start
  Args: module-assistant i
  Package Version: 0.11.4
Function: check_package_status - Utility: End
Function: check_package_status - Utility: Start
  Args: build-essential i
  Package Version: 11.6
Function: check_package_status - Utility: End
Function: check_driver_install_tools - Primary: End
Function: prep_install - Primary: Start
Function: prep_install - Primary: End
Function: preinstall_cleanup - Primary: Start
  Pre Remove: nvidia.ko files:

Function: list_installed_packages - Utility: Start
  Args: nvidia (libkwinnvidiahack|libgl1-nvidia-glx-ia32|modalias|libvdpau|nvidia-bl-dkms|nvidia-cg-toolkit)
  packageList:
Function: list_installed_packages - Utility: End
  Post Purge/Remove: nvidia.ko files:

Function: remove_module - Primary: Start
  Args: nvidia
  operation outcome: unset
Function: remove_module - Primary: End
Function: remove_module - Primary: Start
  Args: nouveau
  operation outcome: unset
Function: set_modesetting_off - Primary: End
Function: add_grub_nomodeset_blacklist_item - Utility: Start
  Args: nouveau
Function: get_active_grub_files - Utility: Start
  grub files:  /boot/grub/grub.cfg /etc/default/grub
Function: get_active_grub_files - Utility: End
Function: add_grub_nomodeset_blacklist_item - Utility: End
Function: add_modprobe_d_blacklist_item - Utility: Start
  Args: nouveau
Function: add_modprobe_d_blacklist_item - Utility: End
Function: set_modesetting_off - Primary: Start
  Args: nouveau unset
Function: remove_module - Primary: End
Function: list_installed_packages - Utility: Start
  Args: fglrx modalias
  packageList:
Function: list_installed_packages - Utility: End
Function: remove_module - Primary: Start
  Args: fglrx
  operation outcome: unset
Function: remove_module - Primary: End
Function: clean_dkms - Primary: Start
Function: clean_dkms - Primary: End
Function: preinstall_cleanup - Primary: End
Function: run_driver_installer - Primary: Start
  driver: 313.18

ERROR: If you are using a Linux 2.4 kernel, please make sure
       you either have configured kernel sources matching your
       kernel or the correct set of kernel headers installed
       on your system.
       
       If you are using a Linux 2.6 kernel, please make sure
       you have configured kernel sources matching your kernel
       installed on your system. If you specified a separate
       output directory using either the "KBUILD_OUTPUT" or
       the "O" KBUILD parameter, make sure to specify this
       directory with the SYSOUT environment variable or with
       the equivalent nvidia-installer command line option.
       
       Depending on where and how the kernel sources (or the
       kernel headers) were installed, you may need to specify
       their location with the SYSSRC environment variable or
       the equivalent nvidia-installer command line option.


ERROR: Installation has failed.  Please see the file
       '/var/log/nvidia-installer.log' for details.  You may find
       suggestions on fixing installation problems in the README available
       on the Linux driver download page at www.nvidia.com.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Error logs from nvidia install:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Wed Feb 27 15:15:01 2013
installer version: 313.18

PATH: /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin

nvidia-installer command line:
    ./nvidia-installer
    -s
    -N
    --x-module-path=/usr/lib/xorg/modules
    --x-library-path=/usr/lib
    -k
    3.7.9-zen.liquorix.3.7.0-9.2-arc.1

Using built-in stream user interface
-> License accepted by command line option.
-> Installing NVIDIA driver version 313.18.
-> Would you like to register the kernel module sources with DKMS? This will allow DKMS to automatically build a new module, if you install a different kernel later. (Answer: No)
-> Not probing for precompiled kernel interfaces.
-> Performing CC sanity check with CC="/usr/bin/gcc-4.7".
-> Kernel source path: '/lib/modules/3.7.9-zen.liquorix.3.7.0-9.2-arc.1/source'
-> Kernel output path: '/lib/modules/3.7.9-zen.liquorix.3.7.0-9.2-arc.1/build'
ERROR: If you are using a Linux 2.4 kernel, please make sure
you either have configured kernel sources matching your
kernel or the correct set of kernel headers installed
on your system.

If you are using a Linux 2.6 kernel, please make sure
you have configured kernel sources matching your kernel
installed on your system. If you specified a separate
output directory using either the "KBUILD_OUTPUT" or
the "O" KBUILD parameter, make sure to specify this
directory with the SYSOUT environment variable or with
the equivalent nvidia-installer command line option.

Depending on where and how the kernel sources (or the
kernel headers) were installed, you may need to specify
their location with the SYSSRC environment variable or
the equivalent nvidia-installer command line option.
ERROR: Installation has failed.  Please see the file '/var/log/nvidia-installer.log' for details.  You may find suggestions on fixing installation problems in the README available on the Linux driver download page at www.nvidia.com.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  ERROR: (245) The nvidia installer exited with the error: 1
A copy of this driver installer error log is also here: /var/log/sgfxi/sgfxi.log

I belive this is the log from the successful installation on 3.7.8.
:: Code ::

=========================================================
START sgfxi LOGGING:
=========================================================
Script started: 2013-02-19-17:25:09
Video Card Information: NVIDIA Corporation GF114 [GeForce GTX 560 Ti] (rev a1)
Video Card Type: 10de
Video Card Number: 1200
Xorg Version: 1.12
Installing driver to kernel: 3.7.8-zen.liquorix.3.7.0-8.1-arc.1
sgfxi script version: 4.20.26
sgfxi start options:  -B -C
SYSTEM_BASE: debian
SYSTEM_CODENAME: sid
DISTRIB_CODENAME: sid
DISTRIB_ID: crunchbang
DISTRIB_RELEASE:
SIS: crunchbang-sid-64
BITS: 64
FG_DISTRIB_CODENAME: sid
FG_DISTRIB_ID: Debian
APT_TYPE: apt-get
=========================================================
X is Running: false
Current Runlevel: 2
Connection is live (0=true): 0
=========================================================
INSTALL_TO_KERNEL:
KERNEL_FULL: 3.7.8-zen.liquorix.3.7.0-8.1-arc.1
KERNEL_BASE: 3
KERNEL_NUMBER: 3.7
KERNEL_MATH: 7
B_IS_XEN: true
Function: create_x_conf - Primary: Start
  xorg is present with xorg.conf file
Function: create_x_conf - Primary: End
Function: check_package_manager_updated - Utility: Start
  sizeWorking: 63
Function: check_package_manager_updated - Utility: End
Function: check_supported_driver - Utility: Start
Function: check_supported_driver - Utility: End
Function: set_cpu_data - Utility: Start
  BITS: 64 - arch: _64
Function: set_cpu_data - Utility: End
Function: set_driver_install_version - Primary: Start
Function: check_supported_driver - Utility: Start
  Args: last-check
Function: check_supported_driver - Utility: End
Function: print_information_continue - Utility: Start
  Args: info You are using the following options:
 -B - Use Beta Driver (nVidia only. Only if available)
 -C - Xorg.conf will not be modified by this script.

Function: print_information_continue - Utility: End
Function: print_information_continue - Utility: Start
  Args: standard The graphics installer will be installing the nvidia driver: 313.18
There is no current beta driver for your nvidia card type.
Using the current stable driver instead.

Function: print_information_continue - Utility: End
  Installing this driver: 313.18
Function: set_driver_install_version - Primary: End
Function: driver_support_tests - Utility: Start
  Args: supported-driver
Function: driver_support_tests - Utility: End
Function: check_kernel_headers - Utility: Start
Function: check_package_status - Utility: Start
  Args: linux-headers-3.7.8-zen.liquorix.3.7.0-8.1-arc.1 i
  Package Version: 3.7.8-zen.liquorix.3.7.0-8.1-arc.1-10.00.Custom
Function: check_package_status - Utility: End
Function: check_package_status - Utility: Start
  Args: linux-headers-3.7.8-zen.liquorix.3.7.0-8.1-arc.1 c
  Package Version:
Function: check_package_status - Utility: End
  headerName: linux-headers-3.7.8-zen.liquorix.3.7.0-8.1-arc.1
headerInstalled: 3.7.8-zen.liquorix.3.7.0-8.1-arc.1-10.00.Custom
headerAvailable:
headerFile:
Function: check_kernel_headers - Utility: End
Function: check_run_package_tools - Primary: Start
Function: check_run_package_tools - Primary: End
Function: set_download_info - Primary: Start
  download url: ftp://download.nvidia.com/XFree86/Linux-x86_64/313.18/ - driver file: NVIDIA-Linux-x86_64-313.18
Function: set_download_info - Primary: End
Function: test_module_build_ok - Primary: Start
  Args: return
  returnValue: 1
Error Data: No Driver Run Package:
Function: download_extract_driver - Primary: Start
  Args: ftp://download.nvidia.com/XFree86/Linux-x86_64/313.18/ NVIDIA-Linux-x86_64-313.18
Function: pre_extract_clean_set_up - Utility: Start
  Args: NVIDIA-Linux-x86_64-313.18
Function: pre_extract_clean_set_up - Utility: End
Creating directory NVIDIA-Linux-x86_64-313.18
Verifying archive integrity... OK
Uncompressing NVIDIA Accelerated Graphics Driver for Linux-x86_64 313.18...........................................................................................................................................................
Function: download_extract_driver - Primary: End
  Function: set_install_directory - set to: /usr/src/sgfxi-downloads/NVIDIA-Linux-x86_64-313.18
Function: run_driver_patches - Primary: Start
Function: run_prepatch_fixes - Primary: Start
  Args: 3.7-path-fix
  Target file exists: /usr/src/linux-headers-3.7.8-zen.liquorix.3.7.0-8.1-arc.1/include/linux/version.h
Function: run_prepatch_fixes - Primary: End
Function: apply_patch_file - Utility: Start
  Args: NVIDIA-uapi-313.18_kernel-3.7-8.patch
  Patch File Dir: /usr/src/sgfxi-downloads/NVIDIA-Linux-x86_64-313.18
  Patch URL: http://smxi.org/sg/patches/NVIDIA-uapi-313.18_kernel-3.7-8.patch
Function: apply_patch_file - Utility: End
Function: run_driver_patches - Primary: End
Function: x_start_stop_master - Primary: Start
  Args: stop
Function: start_stop_x - Utility: Start
  Args: stop
  default runlevel: 2
current runlevel: 2
  dmanCommand: service gdm stop
Function: x_is_running - Utility: Start
  xIsRunning: false
Function: x_is_running - Utility: End
Function: start_stop_x - Utility: End
Function: x_start_stop_master - Primary: End
Function: check_driver_install_tools - Primary: Start
Function: check_package_status - Utility: Start
  Args: module-assistant i
  Package Version: 0.11.4
Function: check_package_status - Utility: End
Function: check_package_status - Utility: Start
  Args: build-essential i
  Package Version: 11.6
Function: check_package_status - Utility: End
Function: check_driver_install_tools - Primary: End
Function: prep_install - Primary: Start
Function: prep_install - Primary: End
Function: preinstall_cleanup - Primary: Start
  Using nvidia uninstaller: /usr/bin/nvidia-installer

WARNING: Your driver installation has been altered since it was initially
         installed; this may happen, for example, if you have since
         installed the NVIDIA driver through a mechanism other than
         nvidia-installer (such as your distribution's native package
         management system).  nvidia-installer will attempt to uninstall as
         best it can.  Please see the file '/var/log/nvidia-installer.log'
         for details.


ERROR: Unable to create '/usr/src/nvidia-313.18/conftest.sh' for copying
       (No such file or directory)


WARNING: Unable to restore file '/usr/src/nvidia-313.18/conftest.sh'.

  Pre Remove: nvidia.ko files:

Function: list_installed_packages - Utility: Start
  Args: nvidia (libkwinnvidiahack|libgl1-nvidia-glx-ia32|modalias|libvdpau|nvidia-bl-dkms|nvidia-cg-toolkit)
  packageList:
Function: list_installed_packages - Utility: End
  Post Purge/Remove: nvidia.ko files:

Function: remove_module - Primary: Start
  Args: nvidia
  operation outcome: unset
Function: remove_module - Primary: End
Function: remove_module - Primary: Start
  Args: nouveau
  operation outcome: unset
Function: set_modesetting_off - Primary: End
Function: add_grub_nomodeset_blacklist_item - Utility: Start
  Args: nouveau
Function: get_active_grub_files - Utility: Start
  grub files:  /boot/grub/grub.cfg /etc/default/grub
Function: get_active_grub_files - Utility: End
Function: add_grub_nomodeset_blacklist_item - Utility: End
Function: add_modprobe_d_blacklist_item - Utility: Start
  Args: nouveau
Function: add_modprobe_d_blacklist_item - Utility: End
Function: set_modesetting_off - Primary: Start
  Args: nouveau unset
Function: remove_module - Primary: End
Function: list_installed_packages - Utility: Start
  Args: fglrx modalias
  packageList:
Function: list_installed_packages - Utility: End
Function: remove_module - Primary: Start
  Args: fglrx
  operation outcome: unset
Function: remove_module - Primary: End
Function: clean_dkms - Primary: Start
Function: clean_dkms - Primary: End
Function: preinstall_cleanup - Primary: End
Function: run_driver_installer - Primary: Start
  driver: 313.18
Function: run_driver_installer - Primary: End
Function: post_installer_steps - Primary: Start
Function: post_installer_steps - Primary: End
Function: final_install_steps - Primary: Start
Function: process_xvmc - Utility: Start
Function: process_xvmc - Utility: End
Function: final_install_steps - Primary: End
Function: x_start_stop_master - Primary: Start
  Args: start
Function: start_x_question - Primary: Start
  Final Step: start-desktop
Function: start_stop_x - Utility: Start
  Args: start
  default runlevel: 2
current runlevel: 2
  dmanCommand: service gdm start

Back to top
anticapitalista
Status: Contributor
Joined: 13 Jun 2008
Posts: 202
Location: Greece
Reply Quote
Are you using the default Statler repos? ie Debian squeeze.

Maybe somewhere here lies the problem?
Back to top
arclance
Status: Interested
Joined: 26 May 2012
Posts: 41
Reply Quote
:: anticapitalista wrote ::
Are you using the default Statler repos? ie Debian squeeze.

Maybe somewhere here lies the problem?

No, the i7 (the one with the problem) is completely Sid now.
It only says statler because I have not looked into how to change what it says yet.

The Core2 is mostly Sid/Testing.
It is not completely Sid because it took 4 hours to do to the other computer and needed a lot of manual intervention to prevent breaking the system.
I have not tired anything with this one yet (I try things on the i7 first) so I can't say if it will have the same problem or not.
I think it will though since they are setup almost identically.
Back to top
techAdmin
Status: Site Admin
Joined: 26 Sep 2003
Posts: 4076
Location: East Coast, West Coast? I know it's one of them.
Reply Quote
try it again, I changed the patch to the 3.8 one, that way at least I'll know if that works.

Again, it's hard to know what's up because my liquorix requires no patch on 3.7 kernel, latest.

However, do note that I'm using a liquorix standard kernel deb install, and you're clearly not running the deb version given the uname -r of your kernel.
Back to top
arclance
Status: Interested
Joined: 26 May 2012
Posts: 41
Reply Quote
:: techAdmin wrote ::
try it again, I changed the patch to the 3.8 one, that way at least I'll know if that works.

That does not work either for 3.7.6 and up, 3.7.5 still works.
:: Code ::

=========================================================
START sgfxi LOGGING:
=========================================================
Script started: 2013-02-28-21:19:59
Video Card Information: NVIDIA Corporation GF114 [GeForce GTX 560 Ti] (rev a1)
Video Card Type: 10de
Video Card Number: 1200
Xorg Version: 1.12
Installing driver to kernel: 3.7.9-zen.liquorix.3.7.0-9.2-arc.1
sgfxi script version: 4.20.30
sgfxi start options:  -B -C
SYSTEM_BASE: debian
SYSTEM_CODENAME: sid
DISTRIB_CODENAME: sid
DISTRIB_ID: crunchbang
DISTRIB_RELEASE:
SIS: crunchbang-sid-64
BITS: 64
FG_DISTRIB_CODENAME: sid
FG_DISTRIB_ID: Debian
APT_TYPE: apt-get
=========================================================
X is Running: false
Current Runlevel: 2
Connection is live (0=true): 0
=========================================================
INSTALL_TO_KERNEL:
KERNEL_FULL: 3.7.9-zen.liquorix.3.7.0-9.2-arc.1
KERNEL_BASE: 3
KERNEL_NUMBER: 3.7
KERNEL_MATH: 7
B_IS_XEN: true
Function: create_x_conf - Primary: Start
  xorg is present with xorg.conf file
Function: create_x_conf - Primary: End
Function: check_package_manager_updated - Utility: Start
  sizeWorking: 63
Function: check_package_manager_updated - Utility: End
Function: check_supported_driver - Utility: Start
Function: check_supported_driver - Utility: End
Function: set_cpu_data - Utility: Start
  BITS: 64 - arch: _64
Function: set_cpu_data - Utility: End
Function: set_driver_install_version - Primary: Start
Function: check_supported_driver - Utility: Start
  Args: last-check
Function: check_supported_driver - Utility: End
Function: print_information_continue - Utility: Start
  Args: info You are using the following options:
 -B - Use Beta Driver (nVidia only. Only if available)
 -C - Xorg.conf will not be modified by this script.

Function: print_information_continue - Utility: End
Function: print_information_continue - Utility: Start
  Args: standard The graphics installer will be installing the nvidia driver: 313.18
There is no current beta driver for your nvidia card type.
Using the current stable driver instead.

Function: print_information_continue - Utility: End
  Installing this driver: 313.18
Function: set_driver_install_version - Primary: End
Function: driver_support_tests - Utility: Start
  Args: supported-driver
Function: driver_support_tests - Utility: End
Function: check_kernel_headers - Utility: Start
Function: check_package_status - Utility: Start
  Args: linux-headers-3.7.9-zen.liquorix.3.7.0-9.2-arc.1 i
  Package Version: 3.7.9-zen.liquorix.3.7.0-9.2-arc.1-10.00.Custom
Function: check_package_status - Utility: End
Function: check_package_status - Utility: Start
  Args: linux-headers-3.7.9-zen.liquorix.3.7.0-9.2-arc.1 c
  Package Version:
Function: check_package_status - Utility: End
  headerName: linux-headers-3.7.9-zen.liquorix.3.7.0-9.2-arc.1
headerInstalled: 3.7.9-zen.liquorix.3.7.0-9.2-arc.1-10.00.Custom
headerAvailable:
headerFile:
Function: check_kernel_headers - Utility: End
Function: check_run_package_tools - Primary: Start
Function: check_run_package_tools - Primary: End
Function: set_download_info - Primary: Start
  download url: ftp://download.nvidia.com/XFree86/Linux-x86_64/313.18/ - driver file: NVIDIA-Linux-x86_64-313.18
Function: set_download_info - Primary: End
Function: test_module_build_ok - Primary: Start
  Args: return
Function: list_installed_packages - Utility: Start
  Args: nvidia (libkwinnvidiahack|libgl1-nvidia-glx-ia32|modalias|libvdpau)
  packageList:
Function: list_installed_packages - Utility: End
  returnValue: 0
Error Data:
Function: build_kernel_module_only - Primary: Start
  Args: build silent
Function: remove_module - Primary: Start
  Args: nouveau
  operation outcome: unset
Function: set_modesetting_off - Primary: End
Function: add_grub_nomodeset_blacklist_item - Utility: Start
  Args: nouveau
Function: get_active_grub_files - Utility: Start
  grub files:  /boot/grub/grub.cfg /etc/default/grub
Function: get_active_grub_files - Utility: End
Function: add_grub_nomodeset_blacklist_item - Utility: End
Function: add_modprobe_d_blacklist_item - Utility: Start
  Args: nouveau
Function: add_modprobe_d_blacklist_item - Utility: End
Function: set_modesetting_off - Primary: Start
  Args: nouveau unset
Function: remove_module - Primary: End
Function: x_start_stop_master - Primary: Start
  Args: stop
Function: start_stop_x - Utility: Start
  Args: stop
  default runlevel: 2
current runlevel: 2
  dmanCommand: service gdm stop
Function: x_is_running - Utility: Start
  xIsRunning: false
Function: x_is_running - Utility: End
Function: start_stop_x - Utility: End
Function: x_start_stop_master - Primary: End
Verifying archive integrity... OK
Uncompressing NVIDIA Accelerated Graphics Driver for Linux-x86_64 313.18...........................................................................................................................................................

ERROR: If you are using a Linux 2.4 kernel, please make sure
       you either have configured kernel sources matching your
       kernel or the correct set of kernel headers installed
       on your system.
       
       If you are using a Linux 2.6 kernel, please make sure
       you have configured kernel sources matching your kernel
       installed on your system. If you specified a separate
       output directory using either the "KBUILD_OUTPUT" or
       the "O" KBUILD parameter, make sure to specify this
       directory with the SYSOUT environment variable or with
       the equivalent nvidia-installer command line option.
       
       Depending on where and how the kernel sources (or the
       kernel headers) were installed, you may need to specify
       their location with the SYSSRC environment variable or
       the equivalent nvidia-installer command line option.


ERROR: Installation has failed.  Please see the file
       '/var/log/nvidia-installer.log' for details.  You may find
       suggestions on fixing installation problems in the README available
       on the Linux driver download page at www.nvidia.com.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Error logs from nvidia install:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Thu Feb 28 21:20:04 2013
installer version: 313.18

PATH: /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin

nvidia-installer command line:
    ./nvidia-installer
    -s
    -N
    --kernel-name=3.7.9-zen.liquorix.3.7.0-9.2-arc.1
    --kernel-module-only
    -a

Using built-in stream user interface
-> Only installing a kernel module for a non-running kernel; skipping the "is an X server running?" test.
-> Only installing a kernel module for a non-running kernel; skipping the "is an NVIDIA kernel module loaded?" test.
-> License accepted by command line option.
-> Installing NVIDIA driver version 313.18.
-> Would you like to register the kernel module sources with DKMS? This will allow DKMS to automatically build a new module, if you install a different kernel later. (Answer: No)
-> Not probing for precompiled kernel interfaces.
-> Performing CC sanity check with CC="cc".
-> Kernel source path: '/lib/modules/3.7.9-zen.liquorix.3.7.0-9.2-arc.1/source'
-> Kernel output path: '/lib/modules/3.7.9-zen.liquorix.3.7.0-9.2-arc.1/build'
ERROR: If you are using a Linux 2.4 kernel, please make sure
you either have configured kernel sources matching your
kernel or the correct set of kernel headers installed
on your system.

If you are using a Linux 2.6 kernel, please make sure
you have configured kernel sources matching your kernel
installed on your system. If you specified a separate
output directory using either the "KBUILD_OUTPUT" or
the "O" KBUILD parameter, make sure to specify this
directory with the SYSOUT environment variable or with
the equivalent nvidia-installer command line option.

Depending on where and how the kernel sources (or the
kernel headers) were installed, you may need to specify
their location with the SYSSRC environment variable or
the equivalent nvidia-installer command line option.
ERROR: Installation has failed.  Please see the file '/var/log/nvidia-installer.log' for details.  You may find suggestions on fixing installation problems in the README available on the Linux driver download page at www.nvidia.com.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  ERROR: (171) The kernel module build failed with error code: 1
Please check /var/log/nvidia-installer.log for more information about the failure.
A copy of this nvidia error log is also here: /var/log/sgfxi/sgfxi.log
Please try to reinstall the driver using: sgfxi -f (force override module build)
because sometimes modules cannot be built to new kernels without the source
being patched first, which requires a driver reinstall.
=========================================================
START sgfxi LOGGING:
=========================================================
Script started: 2013-02-28-21:20:14
Video Card Information: NVIDIA Corporation GF114 [GeForce GTX 560 Ti] (rev a1)
Video Card Type: 10de
Video Card Number: 1200
Xorg Version: 1.12
Installing driver to kernel: 3.7.9-zen.liquorix.3.7.0-9.2-arc.1
sgfxi script version: 4.20.30
sgfxi start options:  -B -C -f
SYSTEM_BASE: debian
SYSTEM_CODENAME: sid
DISTRIB_CODENAME: sid
DISTRIB_ID: crunchbang
DISTRIB_RELEASE:
SIS: crunchbang-sid-64
BITS: 64
FG_DISTRIB_CODENAME: sid
FG_DISTRIB_ID: Debian
APT_TYPE: apt-get
=========================================================
X is Running: false
Current Runlevel: 2
Connection is live (0=true): 0
=========================================================
INSTALL_TO_KERNEL:
KERNEL_FULL: 3.7.9-zen.liquorix.3.7.0-9.2-arc.1
KERNEL_BASE: 3
KERNEL_NUMBER: 3.7
KERNEL_MATH: 7
B_IS_XEN: true
Function: create_x_conf - Primary: Start
  xorg is present with xorg.conf file
Function: create_x_conf - Primary: End
Function: check_package_manager_updated - Utility: Start
  sizeWorking: 63
Function: check_package_manager_updated - Utility: End
Function: check_supported_driver - Utility: Start
Function: check_supported_driver - Utility: End
Function: set_cpu_data - Utility: Start
  BITS: 64 - arch: _64
Function: set_cpu_data - Utility: End
Function: set_driver_install_version - Primary: Start
Function: check_supported_driver - Utility: Start
  Args: last-check
Function: check_supported_driver - Utility: End
Function: print_information_continue - Utility: Start
  Args: info You are using the following options:
 -B - Use Beta Driver (nVidia only. Only if available)
 -C - Xorg.conf will not be modified by this script.
 -f - You are using the forced override option. This will bypass kernel module
 check/build and force reinstall of your driver (nVidia only).

Function: print_information_continue - Utility: End
Function: print_information_continue - Utility: Start
  Args: standard The graphics installer will be installing the nvidia driver: 313.18
There is no current beta driver for your nvidia card type.
Using the current stable driver instead.

Function: print_information_continue - Utility: End
  Installing this driver: 313.18
Function: set_driver_install_version - Primary: End
Function: driver_support_tests - Utility: Start
  Args: supported-driver
Function: driver_support_tests - Utility: End
Function: check_kernel_headers - Utility: Start
Function: check_package_status - Utility: Start
  Args: linux-headers-3.7.9-zen.liquorix.3.7.0-9.2-arc.1 i
  Package Version: 3.7.9-zen.liquorix.3.7.0-9.2-arc.1-10.00.Custom
Function: check_package_status - Utility: End
Function: check_package_status - Utility: Start
  Args: linux-headers-3.7.9-zen.liquorix.3.7.0-9.2-arc.1 c
  Package Version:
Function: check_package_status - Utility: End
  headerName: linux-headers-3.7.9-zen.liquorix.3.7.0-9.2-arc.1
headerInstalled: 3.7.9-zen.liquorix.3.7.0-9.2-arc.1-10.00.Custom
headerAvailable:
headerFile:
Function: check_kernel_headers - Utility: End
Function: check_run_package_tools - Primary: Start
Function: check_run_package_tools - Primary: End
Function: set_download_info - Primary: Start
  download url: ftp://download.nvidia.com/XFree86/Linux-x86_64/313.18/ - driver file: NVIDIA-Linux-x86_64-313.18
Function: set_download_info - Primary: End
Function: download_extract_driver - Primary: Start
  Args: ftp://download.nvidia.com/XFree86/Linux-x86_64/313.18/ NVIDIA-Linux-x86_64-313.18
Function: pre_extract_clean_set_up - Utility: Start
  Args: NVIDIA-Linux-x86_64-313.18
Function: pre_extract_clean_set_up - Utility: End
Creating directory NVIDIA-Linux-x86_64-313.18
Verifying archive integrity... OK
Uncompressing NVIDIA Accelerated Graphics Driver for Linux-x86_64 313.18...........................................................................................................................................................
Function: download_extract_driver - Primary: End
  Function: set_install_directory - set to: /usr/src/sgfxi-downloads/NVIDIA-Linux-x86_64-313.18
Function: run_driver_patches - Primary: Start
Function: run_prepatch_fixes - Primary: Start
  Args: 3.7-path-fix
  Target file exists: /usr/src/linux-headers-3.7.9-zen.liquorix.3.7.0-9.2-arc.1/include/linux/version.h
Function: run_prepatch_fixes - Primary: End
Function: apply_patch_file - Utility: Start
  Args: NVIDIA_313.18-3.8.patch
  Patch File Dir: /usr/src/sgfxi-downloads/NVIDIA-Linux-x86_64-313.18
  Patch URL: http://smxi.org/sg/patches/NVIDIA_313.18-3.8.patch
Function: apply_patch_file - Utility: End
Function: run_driver_patches - Primary: End
Function: x_start_stop_master - Primary: Start
  Args: stop
Function: start_stop_x - Utility: Start
  Args: stop
  default runlevel: 2
current runlevel: 2
  dmanCommand: service gdm stop
Function: x_is_running - Utility: Start
  xIsRunning: false
Function: x_is_running - Utility: End
Function: start_stop_x - Utility: End
Function: x_start_stop_master - Primary: End
Function: check_driver_install_tools - Primary: Start
Function: check_package_status - Utility: Start
  Args: module-assistant i
  Package Version: 0.11.4
Function: check_package_status - Utility: End
Function: check_package_status - Utility: Start
  Args: build-essential i
  Package Version: 11.6
Function: check_package_status - Utility: End
Function: check_driver_install_tools - Primary: End
Function: prep_install - Primary: Start
Function: prep_install - Primary: End
Function: preinstall_cleanup - Primary: Start
  Using nvidia uninstaller: /usr/bin/nvidia-installer

WARNING: Your driver installation has been altered since it was initially
         installed; this may happen, for example, if you have since
         installed the NVIDIA driver through a mechanism other than
         nvidia-installer (such as your distribution's native package
         management system).  nvidia-installer will attempt to uninstall as
         best it can.  Please see the file '/var/log/nvidia-installer.log'
         for details.


WARNING: Unable to remove installed file
         '/usr/src/nvidia-313.18/nv-kernel.o' (No such file or directory).


WARNING: Unable to remove installed file '/usr/src/nvidia-313.18/nv.c' (No
         such file or directory).


WARNING: Unable to remove installed file '/usr/src/nvidia-313.18/nv-acpi.c'
         (No such file or directory).


WARNING: Unable to remove installed file
         '/usr/src/nvidia-313.18/nv-chrdev.c' (No such file or directory).


WARNING: Unable to remove installed file '/usr/src/nvidia-313.18/nv-cray.c'
         (No such file or directory).


WARNING: Unable to remove installed file '/usr/src/nvidia-313.18/nv-gvi.c'
         (No such file or directory).


WARNING: Unable to remove installed file '/usr/src/nvidia-313.18/nv-i2c.c'
         (No such file or directory).


WARNING: Unable to remove installed file
         '/usr/src/nvidia-313.18/nv-mempool.c' (No such file or
         directory).


WARNING: Unable to remove installed file
         '/usr/src/nvidia-313.18/nv-mlock.c' (No such file or directory).


WARNING: Unable to remove installed file '/usr/src/nvidia-313.18/nv-mmap.c'
         (No such file or directory).


WARNING: Unable to remove installed file '/usr/src/nvidia-313.18/nv-p2p.c'
         (No such file or directory).


WARNING: Unable to remove installed file '/usr/src/nvidia-313.18/nv-pat.c'
         (No such file or directory).


WARNING: Unable to remove installed file
         '/usr/src/nvidia-313.18/nv-procfs.c' (No such file or directory).


WARNING: Unable to remove installed file
         '/usr/src/nvidia-313.18/nv-usermap.c' (No such file or
         directory).


WARNING: Unable to remove installed file '/usr/src/nvidia-313.18/nv-vm.c'
         (No such file or directory).


WARNING: Unable to remove installed file
         '/usr/src/nvidia-313.18/nv-vtophys.c' (No such file or
         directory).


WARNING: Unable to remove installed file
         '/usr/src/nvidia-313.18/os-interface.c' (No such file or
         directory).


WARNING: Unable to remove installed file
         '/usr/src/nvidia-313.18/os-registry.c' (No such file or
         directory).


WARNING: Unable to remove installed file '/usr/src/nvidia-313.18/os-smp.c'
         (No such file or directory).


WARNING: Unable to remove installed file
         '/usr/src/nvidia-313.18/os-usermap.c' (No such file or
         directory).


WARNING: Unable to remove installed file
         '/usr/src/nvidia-313.18/conftest.sh' (No such file or directory).


WARNING: Unable to remove installed file '/usr/src/nvidia-313.18/nv.h' (No
         such file or directory).


WARNING: Unable to remove installed file
         '/usr/src/nvidia-313.18/nv-linux.h' (No such file or directory).


WARNING: Unable to remove installed file
         '/usr/src/nvidia-313.18/nv-memdbg.h' (No such file or directory).


WARNING: Unable to remove installed file '/usr/src/nvidia-313.18/nv-misc.h'
         (No such file or directory).


WARNING: Unable to remove installed file '/usr/src/nvidia-313.18/nv-p2p.h'
         (No such file or directory).


WARNING: Unable to remove installed file
         '/usr/src/nvidia-313.18/nv-proto.h' (No such file or directory).


WARNING: Unable to remove installed file '/usr/src/nvidia-313.18/nv-reg.h'
         (No such file or directory).


WARNING: Unable to remove installed file
         '/usr/src/nvidia-313.18/os-interface.h' (No such file or
         directory).


WARNING: Unable to remove installed file
         '/usr/src/nvidia-313.18/cpuopsys.h' (No such file or directory).


WARNING: Unable to remove installed file
         '/usr/src/nvidia-313.18/g_nvreadme.h' (No such file or
         directory).


WARNING: Unable to remove installed file '/usr/src/nvidia-313.18/nverror.h'
         (No such file or directory).


WARNING: Unable to remove installed file '/usr/src/nvidia-313.18/nvtypes.h'
         (No such file or directory).


WARNING: Unable to remove installed file '/usr/src/nvidia-313.18/rmil.h'
         (No such file or directory).


WARNING: Unable to remove installed file
         '/usr/src/nvidia-313.18/rmretval.h' (No such file or directory).


WARNING: Unable to remove installed file
         '/usr/src/nvidia-313.18/xapi-sdk.h' (No such file or directory).


WARNING: Unable to remove installed file
         '/usr/src/nvidia-313.18/gcc-version-check.c' (No such file or
         directory).


WARNING: Unable to remove installed file
         '/usr/src/nvidia-313.18/Makefile.nvidia' (No such file or
         directory).


WARNING: Unable to remove installed file
         '/usr/src/nvidia-313.18/Makefile.kbuild' (No such file or
         directory).


WARNING: Unable to remove installed file '/usr/src/nvidia-313.18/makefile'
         (No such file or directory).


WARNING: Unable to remove installed file '/usr/src/nvidia-313.18/dkms.conf'
         (No such file or directory).


WARNING: Failed to delete the directory '/usr/src/nvidia-313.18' (Directory
         not empty).

  Pre Remove: nvidia.ko files:

Function: list_installed_packages - Utility: Start
  Args: nvidia (libkwinnvidiahack|libgl1-nvidia-glx-ia32|modalias|libvdpau|nvidia-bl-dkms|nvidia-cg-toolkit)
  packageList:
Function: list_installed_packages - Utility: End
  Post Purge/Remove: nvidia.ko files:

rm: cannot remove /usr/src/nvidia-313.18: Is a directory
Function: remove_module - Primary: Start
  Args: nvidia
  operation outcome: unset
Function: remove_module - Primary: End
Function: remove_module - Primary: Start
  Args: nouveau
  operation outcome: unset
Function: set_modesetting_off - Primary: End
Function: add_grub_nomodeset_blacklist_item - Utility: Start
  Args: nouveau
Function: get_active_grub_files - Utility: Start
  grub files:  /boot/grub/grub.cfg /etc/default/grub
Function: get_active_grub_files - Utility: End
Function: add_grub_nomodeset_blacklist_item - Utility: End
Function: add_modprobe_d_blacklist_item - Utility: Start
  Args: nouveau
Function: add_modprobe_d_blacklist_item - Utility: End
Function: set_modesetting_off - Primary: Start
  Args: nouveau unset
Function: remove_module - Primary: End
Function: list_installed_packages - Utility: Start
  Args: fglrx modalias
  packageList:
Function: list_installed_packages - Utility: End
Function: remove_module - Primary: Start
  Args: fglrx
  operation outcome: unset
Function: remove_module - Primary: End
Function: clean_dkms - Primary: Start
Function: clean_dkms - Primary: End
Function: preinstall_cleanup - Primary: End
Function: run_driver_installer - Primary: Start
  driver: 313.18

ERROR: If you are using a Linux 2.4 kernel, please make sure
       you either have configured kernel sources matching your
       kernel or the correct set of kernel headers installed
       on your system.
       
       If you are using a Linux 2.6 kernel, please make sure
       you have configured kernel sources matching your kernel
       installed on your system. If you specified a separate
       output directory using either the "KBUILD_OUTPUT" or
       the "O" KBUILD parameter, make sure to specify this
       directory with the SYSOUT environment variable or with
       the equivalent nvidia-installer command line option.
       
       Depending on where and how the kernel sources (or the
       kernel headers) were installed, you may need to specify
       their location with the SYSSRC environment variable or
       the equivalent nvidia-installer command line option.


ERROR: Installation has failed.  Please see the file
       '/var/log/nvidia-installer.log' for details.  You may find
       suggestions on fixing installation problems in the README available
       on the Linux driver download page at www.nvidia.com.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Error logs from nvidia install:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Thu Feb 28 21:20:20 2013
installer version: 313.18

PATH: /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin

nvidia-installer command line:
    ./nvidia-installer
    -s
    -N
    --x-module-path=/usr/lib/xorg/modules
    --x-library-path=/usr/lib
    -k
    3.7.9-zen.liquorix.3.7.0-9.2-arc.1

Using built-in stream user interface
-> License accepted by command line option.
-> Installing NVIDIA driver version 313.18.
-> Would you like to register the kernel module sources with DKMS? This will allow DKMS to automatically build a new module, if you install a different kernel later. (Answer: No)
-> Not probing for precompiled kernel interfaces.
-> Performing CC sanity check with CC="/usr/bin/gcc-4.7".
-> Kernel source path: '/lib/modules/3.7.9-zen.liquorix.3.7.0-9.2-arc.1/source'
-> Kernel output path: '/lib/modules/3.7.9-zen.liquorix.3.7.0-9.2-arc.1/build'
ERROR: If you are using a Linux 2.4 kernel, please make sure
you either have configured kernel sources matching your
kernel or the correct set of kernel headers installed
on your system.

If you are using a Linux 2.6 kernel, please make sure
you have configured kernel sources matching your kernel
installed on your system. If you specified a separate
output directory using either the "KBUILD_OUTPUT" or
the "O" KBUILD parameter, make sure to specify this
directory with the SYSOUT environment variable or with
the equivalent nvidia-installer command line option.

Depending on where and how the kernel sources (or the
kernel headers) were installed, you may need to specify
their location with the SYSSRC environment variable or
the equivalent nvidia-installer command line option.
ERROR: Installation has failed.  Please see the file '/var/log/nvidia-installer.log' for details.  You may find suggestions on fixing installation problems in the README available on the Linux driver download page at www.nvidia.com.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  ERROR: (245) The nvidia installer exited with the error: 1
A copy of this driver installer error log is also here: /var/log/sgfxi/sgfxi.log

:: techAdmin wrote ::

Again, it's hard to know what's up because my liquorix requires no patch on 3.7 kernel, latest.

However, do note that I'm using a liquorix standard kernel deb install, and you're clearly not running the deb version given the uname -r of your kernel.

I built the kernel my self, starting with Liquorix.
I need some non-standard build options for my wireless card because the ath9k devs decided it was a good idea to hide hardware settings (ANI (Adaptive Noise Immunity)) in its debugfs interface.
:: Code ::

CONFIG_MAC80211_DEBUGFS=y
CONFIG_ATH9K_DEBUGFS=y
CONFIG_ATH_DEBUG=y

compat-drivers was half broken for 3.7 (ath9k did not build at all) until recently so I started building the kernel instead.
I have not made any changes to my build setting alterations since 3.7.5 (other than the ones that change in Liquorix itself) and it works up to 3.7.5 so I don't think my settings are the problem.
The fact that a different version of sgfxi worked with my 3.7.8 kernel also makes me suspect that it is not due to some change I made.
Back to top
techAdmin
Status: Site Admin
Joined: 26 Sep 2003
Posts: 4076
Location: East Coast, West Coast? I know it's one of them.
Reply Quote
I'm not going to support this issue anymore, but I did try just to make sure, this is today, using the 3.8 patch for 313.18 and -f and the latest liquorix:

:: Code ::
Using the previously downloaded installer package: NVIDIA-Linux-x86-313.18
Extracting NVIDIA-Linux-x86-313.18...
Running pre-install patch for kernel header uapi path tweak...
Target file exists: /usr/src/linux-headers-3.7.0-10.dmz.1-liquorix-686/include/linux/version.h
Retrieving patch NVIDIA_313.18-3.8.patch...
Running patch NVIDIA_313.18-3.8.patch...
patching file kernel/conftest.sh
Patching completed...
Attempting to stop default display manager kdm now...
[ ok ] Stopping K Display Manager: kdm...done ( not running (/var/run/kdm.pid not found)).
Display manager stop successful.
Preparing driver install...
Running preinstall cleanup...
Running driver installer for 313.18 (this might take a while)...
Running post installer steps...
Backup copy of your previous version: /etc/X11/xorg.conf-bu-2013-02-28-22:42:11
Updating your /etc/X11/xorg.conf file now...
Finalizing install...
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Congratulations! It looks like your new 313.18 nvidia driver installed successfully!
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Your driver install is now finished. You have the following options:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -


and

:: Code ::
 inxi -ISGxx
System:    Host: yawn Kernel: 3.7.0-10.dmz.1-liquorix-686 i686 (32 bit, gcc: 4.7.2)
           Desktop: KDE 4.8.4 (Qt 4.8.2) dm: kdm Distro: sidux-20070102-d:1
Graphics:  Card: NVIDIA G86 [GeForce 8400 GS] bus-ID: 02:00.0 chip-ID: 10de:0422
           X.Org: 1.12.4 driver: nvidia Resolution: 1280x1024@75.0hz, 1280x1024@60.0hz
           GLX Renderer: GeForce 8400 GS/PCIe/SSE2/3DNOW! GLX Version: 3.3.0 NVIDIA 313.18 Direct Rendering: Yes
Info:      Processes: 181 Uptime: 5 min Memory: 506.4/6080.4MB Runlevel: 3 Gcc sys: 4.7.2 alt: 4.0/4.2/4.4/4.5/4.6
           Client: Shell (bash 4.2.37 running in xterm) inxi: 1.8.44


driver installed fine, no failures, patch applied fine, no failures, x started fine, no failures.

I won't accept any more issue reports unless you use a standard kernel or liquorix/siduction/aptosid/debian kernels without further modification, any issues you find using your own spins are not my problem, and I don't have the resources or time to try to deal with custom kernels.

3.7-9 worked fine, and now 3.7-10 works fine, and all my other kernels also have worked fine, which is what made this issue so frustrating.

Again, you can ask damentz what he thinks might cause the failure, but please don't ask for support until you run standard kernels, it's not fair or right for you to use my time this way.
Back to top
anticapitalista
Status: Contributor
Joined: 13 Jun 2008
Posts: 202
Location: Greece
Reply Quote
h2,

Just to point out that antiX kernels work just fine as well.
Back to top
techAdmin
Status: Site Admin
Joined: 26 Sep 2003
Posts: 4076
Location: East Coast, West Coast? I know it's one of them.
Reply Quote
anticap, thanks for confirming. It's clear from the error message he posted that his build of the kernel headers didn't work right, and that these are NOT correctly done kernels.

However, on the bright side, the patches now work, except for 3.8 kernels and 173.14.36, if you hear or see of a patch that works can you get a link and post it? That's the only one that doesn't work.

I'm not patching the long term release driver 310.32 because 313.18 works and that's good enough for now.
Back to top
arclance
Status: Interested
Joined: 26 May 2012
Posts: 41
Reply Quote
I was able to figure out where to modify sgfxi to use a different patch from your last commit.
It works if I use this patch.
:: Code ::

System:    Host: The-Hammer Kernel: 3.7.10-zen.liquorix.3.7.0-10.1-arc.1 x86_64 (64 bit)
           Desktop: Fluxbox 1.3.3 Distro: Debian unstable
Graphics:  Card: NVIDIA GF114 [GeForce GTX 560 Ti]
           X.Org: 1.12.4 driver: nvidia Resolution: 1920x1080@60.0hz, 1920x1080@60.0hz
           GLX Renderer: GeForce GTX 560 Ti/PCIe/SSE2 GLX Version: 4.3.0 NVIDIA 313.18
Info:      Processes: 196 Uptime: 8 min Memory: 930.4/16010.5MB Client: Shell (bash) inxi: 1.8.43

I don't know what could be causing the problem for me and you don't need to look into it anymore but maybe this will help if someone else has the same problem.
Back to top
Display posts from previous:   
Page: Previous  1, 2, 3, 4, 5
All times are GMT - 8 Hours