Page: 1, 2  Next

Liquorix kernel won't recognize my mp3 player
mikhou
Status: Curious
Joined: 29 Nov 2010
Posts: 9
Reply Quote
I am an American living and working in Central Asia and needed an mp3 player. So I found a cheap little knockoff model called Audionic. Here's the thing. My liquroix kernel (2.6.36-0.dmz.10-liquorix-686) won't recognize the mp3 player or the usb drive itself. It recognizes other usb sticks with no problems, but not this one. Also, if I boot into my standard kernel, I have no problems using the usb drive on the mp3 player. FYI, I'm running Debian XFCE (testing). I'd really like to get this to work because the liquorix kernel is my default in GRUB2, and I really don't want to have to reboot everytime just to add and remove music. Thanks. Any ideas?

mikhou
Back to top
techAdmin
Status: Site Admin
Joined: 26 Sep 2003
Posts: 4043
Location: East Coast, West Coast? I know it's one of them.
Reply Quote
Make sure the player is set to use MSC mode, that's where it looks like a usb memory stick to the system, not MTP or autoselect.
Back to top
mikhou
Status: Curious
Joined: 29 Nov 2010
Posts: 9
Reply Quote
I don't see a place to change those settings, but I would think that it's already set properly since my other Linux kernel sees it as a USB flash drive. Right?

mikhou
Back to top
techAdmin
Status: Site Admin
Joined: 26 Sep 2003
Posts: 4043
Location: East Coast, West Coast? I know it's one of them.
Reply Quote
the point here would be to get rid of the 'assumption' and actually know by forcing this setting explicitly. Since it's a knockoff, there is no knowledge base about it, I can't tell you how to set anything in it, etc, unless google is aware of the issue re some other Linux user with 2.6.36 running into the same issue.

There's no problem with 2.6.36 liquorix kernels + media device in general, a sansa fuze for example works fine on that kernel, though I haven't tested it on the last version of the liquorix 2.6.36.

In general it's not a good idea to buy no name brands in order to save a few yuan or whatever when you are running Linux, you want to stick with known good devices, much less pain long term.
Back to top
mikhou
Status: Curious
Joined: 29 Nov 2010
Posts: 9
Reply Quote
If I could buy name-brand I would, but in the 3rd world country that I live in, the knockoff is the only one available.

mikhou
Back to top
damentz
Status: Assistant
Joined: 09 Sep 2008
Posts: 931
Reply Quote
What does dmesg report when you plug in the usb drive? Can you run dmesg | tail -n20 when booted to each kernel a moment after plugging in your mp3 player?

Also, look in /dev for another block device (sdb, sdc, etc). It could be that XFCE has a small incompatibility with new kernels that's preventing it from finding your mp3 player.
Back to top
mikhou
Status: Curious
Joined: 29 Nov 2010
Posts: 9
Reply Quote
I don't know if you really wanted all of this, but here's the result of "dmesg" in the Liquorix kernel.

reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 3583MB, range: 1MB, type UC
total RAM covered: 7679M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 1G num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3583MB, range: 1MB, type UC
reg 2, base: 3584MB, range: 512MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved)
initial memory mapped : 0 - 00c00000
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 7000-c000
RAMDISK: 37638000 - 37ff0000
Allocated new RAMDISK: 007fc000 - 011b3478
Move RAMDISK from 0000000037638000 - 0000000037fef477 to 007fc000 - 011b3477
ACPI: RSDP 000fbbf0 00024 (v02 DELL )
ACPI: XSDT dfe6f200 0005C (v01 DELL M08 27D80C13 ASL 00000061)
ACPI: FACP dfe6f09c 000F4 (v04 DELL M08 27D80C13 ASL 00000061)
ACPI: DSDT dfe6f800 05676 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
ACPI: FACS dfe7e000 00040
ACPI: HPET dfe6f300 00038 (v01 DELL M08 00000001 ASL 00000061)
ACPI: APIC dfe6f400 00068 (v01 DELL M08 27D80C13 ASL 00000047)
ACPI: MCFG dfe6f3c0 0003E (v16 DELL M08 27D80C13 ASL 00000061)
ACPI: SLIC dfe6f49c 00176 (v01 DELL M08 27D80C13 ASL 00000061)
ACPI: BOOT dfe6efc0 00028 (v01 DELL M08 27D80C13 ASL 00000061)
ACPI: SSDT dfe6d9bc 004CC (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
2694MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
early_res array is doubled to 64 at [8000 - 87ff]
early_res array is doubled to 128 at [8800 - 97ff]
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x000dfe6d
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000001 -> 0x0000009f
0: 0x00000100 -> 0x000dfe6d
On node 0 totalpages: 917003
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3966 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 5389 pages used for memmap
HighMem zone: 684386 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Allocating PCI resources starting at e0000000 (gap: e0000000:14000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 15 pages/cpu @c3000000 s37760 r0 d23680 u2097152
pcpu-alloc: s37760 r0 d23680 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 909838
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.36-1.dmz.3-liquorix-686 root=UUID=6a526a5a-af8b-4032-919c-f1f2b9dccdaf ro quiet
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Subtract (99 early reservations)
#1 [0000001000 - 0000002000] EX TRAMPOLINE
#2 [0000200000 - 00007f74cc] TEXT DATA BSS
#3 [000009f000 - 0000100000] BIOS reserved
#4 [00007f8000 - 00007fb188] BRK
#5 [0000002000 - 0000003000] TRAMPOLINE
#6 [0000003000 - 0000007000] ACPI WAKEUP
#7 [0000007000 - 0000008000] PGTABLE
#8 [00007fc000 - 00011b4000] NEW RAMDISK
#9 [00011b4000 - 00011b5000] BOOTMEM
#10 [00011b5100 - 00011b52c0] BOOTMEM
#11 [00011b6000 - 0001236000] BOOTMEM
#12 [0001236000 - 00012b6000] BOOTMEM
#13 [00012b6000 - 0001336000] BOOTMEM
#14 [0001336000 - 00013b6000] BOOTMEM
#15 [00013b6000 - 0001436000] BOOTMEM
#16 [0001436000 - 00014b6000] BOOTMEM
#17 [00014b6000 - 0001536000] BOOTMEM
#18 [0001536000 - 00015b6000] BOOTMEM
#19 [00015b6000 - 0001636000] BOOTMEM
#20 [0001636000 - 00016b6000] BOOTMEM
#21 [00016b6000 - 0001736000] BOOTMEM
#22 [0001736000 - 00017b6000] BOOTMEM
#23 [00017b6000 - 0001836000] BOOTMEM
#24 [0001836000 - 00018b6000] BOOTMEM
#25 [00018b6000 - 0001936000] BOOTMEM
#26 [0001936000 - 00019b6000] BOOTMEM
#27 [00019b6000 - 0001a36000] BOOTMEM
#28 [0001a36000 - 0001ab6000] BOOTMEM
#29 [0001ab6000 - 0001b36000] BOOTMEM
#30 [0001b36000 - 0001bb6000] BOOTMEM
#31 [0001bb6000 - 0001c36000] BOOTMEM
#32 [0001c36000 - 0001cb6000] BOOTMEM
#33 [0001cb6000 - 0001d36000] BOOTMEM
#34 [0001d36000 - 0001db6000] BOOTMEM
#35 [0001db6000 - 0001e36000] BOOTMEM
#36 [0001e36000 - 0001eb6000] BOOTMEM
#37 [0001eb6000 - 0001f36000] BOOTMEM
#38 [0001f36000 - 0001fb6000] BOOTMEM
#39 [0001fb6000 - 0002036000] BOOTMEM
#40 [0002036000 - 00020b6000] BOOTMEM
#41 [00020b6000 - 0002136000] BOOTMEM
#42 [0002136000 - 00021b6000] BOOTMEM
#43 [00021b6000 - 0002236000] BOOTMEM
#44 [0002236000 - 00022b6000] BOOTMEM
#45 [00022b6000 - 0002336000] BOOTMEM
#46 [0002336000 - 00023b6000] BOOTMEM
#47 [00023b6000 - 0002436000] BOOTMEM
#48 [0002436000 - 00024b6000] BOOTMEM
#49 [00024b6000 - 0002536000] BOOTMEM
#50 [0002536000 - 00025b6000] BOOTMEM
#51 [00025b6000 - 0002636000] BOOTMEM
#52 [0002636000 - 00026b6000] BOOTMEM
#53 [00026b6000 - 0002736000] BOOTMEM
#54 [0002736000 - 00027b6000] BOOTMEM
#55 [00027b6000 - 0002836000] BOOTMEM
#56 [0002836000 - 00028b6000] BOOTMEM
#57 [00028b6000 - 0002936000] BOOTMEM
#58 [0002936000 - 00029b6000] BOOTMEM
#59 [00029b6000 - 0002a36000] BOOTMEM
#60 [0002a36000 - 0002ab6000] BOOTMEM
#61 [0002ab6000 - 0002b36000] BOOTMEM
#62 [0002b36000 - 0002bb6000] BOOTMEM
#63 [0002bb6000 - 0002c36000] BOOTMEM
#64 [0002c36000 - 0002cb6000] BOOTMEM
#65 [0002cb6000 - 0002d36000] BOOTMEM
#66 [0002d36000 - 0002db6000] BOOTMEM
#67 [00011b5000 - 00011b50c0] BOOTMEM
#68 [0002db6000 - 0002db9000] BOOTMEM
#69 [0002db9000 - 0002dc5000] BOOTMEM
#70 [00011b50c0 - 00011b50e5] BOOTMEM
#71 [00011b52c0 - 00011b52e7] BOOTMEM
#72 [00011b5300 - 00011b546c] BOOTMEM
#73 [00011b5480 - 00011b54c0] BOOTMEM
#74 [00011b54c0 - 00011b5500] BOOTMEM
#75 [00011b5500 - 00011b5540] BOOTMEM
#76 [00011b5540 - 00011b5580] BOOTMEM
#77 [00011b5580 - 00011b55c0] BOOTMEM
#78 [00011b55c0 - 00011b5600] BOOTMEM
#79 [00011b5600 - 00011b5640] BOOTMEM
#80 [00011b5640 - 00011b5680] BOOTMEM
#81 [00011b5680 - 00011b56c0] BOOTMEM
#82 [00011b56c0 - 00011b5700] BOOTMEM
#83 [00011b5700 - 00011b5740] BOOTMEM
#84 [00011b5740 - 00011b5780] BOOTMEM
#85 [00011b5780 - 00011b5790] BOOTMEM
#86 [00011b57c0 - 00011b582d] BOOTMEM
#87 [00011b5840 - 00011b58ad] BOOTMEM
#88 [0003000000 - 000300f000] BOOTMEM
#89 [0003200000 - 000320f000] BOOTMEM
#90 [00011b58c0 - 00011b58c4] BOOTMEM
#91 [00011b5900 - 00011b5904] BOOTMEM
#92 [00011b5940 - 00011b5948] BOOTMEM
#93 [00011b5980 - 00011b5988] BOOTMEM
#94 [00011b59c0 - 00011b5a68] BOOTMEM
#95 [00011b5a80 - 00011b5ae8] BOOTMEM
#96 [0002dc5000 - 0002dc9000] BOOTMEM
#97 [0002dc9000 - 0002e49000] BOOTMEM
#98 [0002e49000 - 0002e89000] BOOTMEM
Initializing HighMem for node 0 (000377fe:000dfe6d)
Memory: 3622260k/3668404k available (3355k kernel code, 45752k reserved, 1708k data, 528k init, 2759100k highmem)
virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc06f2000 - 0xc0776000 ( 528 kB)
.data : 0xc0546c92 - 0xc06f1f28 (1708 kB)
.text : 0xc0200000 - 0xc0546c92 (3355 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptable hierarchical RCU implementation.
CONFIG_RCU_FANOUT set to non-default value of 8
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:2304 nr_irqs:512
CPU 0 irqstacks, hard=c3000000 soft=c3001000
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1995.186 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.37 BogoMIPS (lpj=1995186)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Disabled at boot.
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 512
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20100702
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d
CPU 1 irqstacks, hard=c3200000 soft=c3201000
Booting Node 0, Processors #1 Ok.
Initializing CPU#1
Brought up 2 CPUs
Total of 2 processors activated (7980.17 BogoMIPS).
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: SSDT dfe6e4f2 00286 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00286 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT dfe6de88 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: SSDT dfe6e778 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: SSDT dfe6e46d 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xf3ffffff]
pci_root PNP0A03:00: host bridge window [mem 0xf8000000-0xfebfffff]
pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff]
pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff]
pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff]
pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff]
pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff]
pci_root PNP0A03:00: host bridge window [mem 0xffb00000-0xffefffff]
pci_root PNP0A03:00: address space collision: host bridge window [mem 0x20000000-0x17ffffff] conflicts with PCI mem [mem 0x00000000-0xffffffff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io 0x6f20-0x6f3f]
pci 0000:00:1a.1: reg 20: [io 0x6f00-0x6f1f]
pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x6f80-0x6f9f]
pci 0000:00:1d.1: reg 20: [io 0x6f60-0x6f7f]
pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f]
pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7]
pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7]
pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177]
pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377]
pci 0000:00:1f.1: reg 20: [io 0x6fa0-0x6faf]
pci 0000:00:1f.2: reg 10: [io 0x6eb0-0x6eb7]
pci 0000:00:1f.2: reg 14: [io 0x6eb8-0x6ebb]
pci 0000:00:1f.2: reg 18: [io 0x6ec0-0x6ec7]
pci 0000:00:1f.2: reg 1c: [io 0x6ec8-0x6ecb]
pci 0000:00:1f.2: reg 20: [io 0x6ee0-0x6eff]
pci 0000:00:1f.2: reg 24: [mem 0xfebfb800-0xfebfbfff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xfebfb700-0xfebfb7ff]
pci 0000:00:1f.3: reg 20: [io 0x10c0-0x10df]
pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:0c:00.0: reg 10: [mem 0xf9ffc000-0xf9ffffff]
pci 0000:0c:00.0: supports D1 D2
pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.1: bridge window [mem 0xf9f00000-0xf9ffffff]
pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xf9c00000-0xf9efffff]
pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:09:00.0: reg 10: [mem 0xf9bf0000-0xf9bfffff 64bit]
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 09-09]
pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.5: bridge window [mem 0xf9b00000-0xf9bfffff]
pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:01.0: reg 10: [mem 0xf9aff800-0xf9afffff]
pci 0000:03:01.0: supports D1 D2
pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.0: PME# disabled
pci 0000:03:01.1: reg 10: [mem 0xf9aff500-0xf9aff5ff]
pci 0000:03:01.1: supports D1 D2
pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.1: PME# disabled
pci 0000:03:01.2: reg 10: [mem 0xf9aff600-0xf9aff6ff]
pci 0000:03:01.2: supports D1 D2
pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.2: PME# disabled
pci 0000:03:01.3: reg 10: [mem 0xf9aff700-0xf9aff7ff]
pci 0000:03:01.3: supports D1 D2
pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.3: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xf9a00000-0xf9afffff]
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf3ffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfebfffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfec10000-0xfecfffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed1c000-0xfed1ffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed90000-0xfed9ffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfedfffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfee10000-0xff9fffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xffb00000-0xffefffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
HEST: Table is not found!
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f000 - 000000000009ffff
reserve RAM buffer: 00000000dfe6d800 - 00000000dfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:09: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f]
pnp 00:09: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f]
pnp 00:0a: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f]
pnp 00:0a: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f]
pnp 00:0a: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f]
pnp 00:0a: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f]
pnp 00:0b: disabling [mem 0xdff00000-0xe06fffff] because it overlaps 0000:00:01.0 BAR 9 [mem 0xe0000000-0xefffffff 64bit pref]
pnp 00:0b: disabling [mem 0xdff00000-0xe06fffff disabled] because it overlaps 0000:01:00.0 BAR 1 [mem 0xe0000000-0xefffffff 64bit pref]
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:05: [io 0x0c80-0x0cff] could not be reserved
system 00:08: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:09: [io 0x0900-0x097f] has been reserved
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:0a: [io 0xf400-0xf4fe] has been reserved
system 00:0a: [io 0x1080-0x10bf] has been reserved
system 00:0a: [io 0x10c0-0x10df] has been reserved
system 00:0a: [io 0x0809] has been reserved
system 00:0b: [mem 0x00000000-0x0009efff] could not be reserved
system 00:0b: [mem 0x0009f000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0b: [mem 0x00100000-0xdfe6d7ff] could not be reserved
system 00:0b: [mem 0xdfe6d800-0xdfefffff] has been reserved
system 00:0b: [mem 0xdff00000-0xdfffffff] has been reserved
system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
system 00:0b: [mem 0xffa00000-0xffafffff] has been reserved
system 00:0b: [mem 0xfec00000-0xfec0ffff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xfeda0000-0xfeda3fff] has been reserved
system 00:0b: [mem 0xfeda4000-0xfeda4fff] has been reserved
system 00:0b: [mem 0xfeda5000-0xfeda5fff] has been reserved
system 00:0b: [mem 0xfeda6000-0xfeda6fff] has been reserved
system 00:0b: [mem 0xfed18000-0xfed1bfff] has been reserved
system 00:0b: [mem 0xf4000000-0xf7ffffff] has been reserved
pci 0000:00:1c.0: BAR 8: assigned [mem 0xf0200000-0xf03fffff]
pci 0000:00:1c.0: BAR 9: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:00:1c.1: BAR 9: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
pci 0000:00:1c.5: BAR 9: assigned [mem 0xf0800000-0xf09fffff 64bit pref]
pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.1: BAR 7: assigned [io 0x3000-0x3fff]
pci 0000:00:1c.5: BAR 7: assigned [io 0x4000-0x4fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff]
pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xf9f00000-0xf9ffffff]
pci 0000:00:1c.1: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xf9c00000-0xf9efffff]
pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 09-09]
pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.5: bridge window [mem 0xf9b00000-0xf9bfffff]
pci 0000:00:1c.5: bridge window [mem 0xf0800000-0xf09fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03-03]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem 0xf9a00000-0xf9afffff]
pci 0000:00:1e.0: bridge window [mem pref disabled]
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf3ffffff]
pci_bus 0000:00: resource 9 [mem 0xf8000000-0xfebfffff]
pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff]
pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff]
pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff]
pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff]
pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff]
pci_bus 0000:00: resource 15 [mem 0xffb00000-0xffefffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:0b: resource 1 [mem 0xf0200000-0xf03fffff]
pci_bus 0000:0b: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
pci_bus 0000:0c: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:0c: resource 1 [mem 0xf9f00000-0xf9ffffff]
pci_bus 0000:0c: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
pci_bus 0000:0d: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:0d: resource 1 [mem 0xf9c00000-0xf9efffff]
pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:09: resource 1 [mem 0xf9b00000-0xf9bfffff]
pci_bus 0000:09: resource 2 [mem 0xf0800000-0xf09fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf9a00000-0xf9afffff]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xe0000000-0xf3ffffff]
pci_bus 0000:03: resource 9 [mem 0xf8000000-0xfebfffff]
pci_bus 0000:03: resource 10 [mem 0xfec10000-0xfecfffff]
pci_bus 0000:03: resource 11 [mem 0xfed1c000-0xfed1ffff]
pci_bus 0000:03: resource 12 [mem 0xfed90000-0xfed9ffff]
pci_bus 0000:03: resource 13 [mem 0xfeda7000-0xfedfffff]
pci_bus 0000:03: resource 14 [mem 0xfee10000-0xff9fffff]
pci_bus 0000:03: resource 15 [mem 0xffb00000-0xffefffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 9952k freed
Simple Boot Flag at 0x79 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1291456301.534:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1705
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler bfq registered (default)
intel_idle: MWAIT substates: 0x22220
intel_idle: does not run on family 6 model 15
ERST: Table is not found!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Adaptec aacraid driver 1.1-5[26400]-ms
Fixed MDIO Bus: probed
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
cpuidle: using governor ladder
cpuidle: using governor menu
TCP vegas registered
TCP yeah registered
Registering the dns_resolver key type
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 528k freed
CFS CPU scheduler.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
udev[543]: starting version 164
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.36-1.dmz.3-liquorix-686 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
tg3.c:v3.113 (August 2, 2010)
tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:09:00.0: setting latency timer to 64
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.36-1.dmz.3-liquorix-686 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM] (33 C)
libata version 3.00 loaded.
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.36-1.dmz.3-liquorix-686 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.36-1.dmz.3-liquorix-686 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
firewire_ohci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.36-1.dmz.3-liquorix-686 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.36-1.dmz.3-liquorix-686 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.36-1.dmz.3-liquorix-686 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
alloc irq_desc for 40 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfebfb800 port 0xfebfb900 irq 40
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xfebfb800 port 0xfebfba00 irq 40
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
ata5: port disabled. ignoring.
b43-pci-bridge 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
b43-pci-bridge 0000:0c:00.0: setting latency timer to 64
ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243)
ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243)
ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243)
ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243)
firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22)
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
mmc0: no vmmc regulator found
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
ssb: Sonics Silicon Backplane found on PCI device 0000:0c:00.0
tg3 0000:09:00.0: eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:1c:23:f7:b4:ef
tg3 0000:09:00.0: eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0])
tg3 0000:09:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0]
tg3 0000:09:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
ata4.00: ATAPI: PIONEER DVD+/-RW DR-K17Y, 0.96, max UDMA/33
ata4.00: configured for UDMA/33
usb 2-2: new high speed USB device using ehci_hcd and address 2
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-8: WDC WD3200BJKT-00F4T0, 11.01A11, max UDMA/133
ata1.00: 625142448 sectors, multi 8: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD3200BJKT-0 11.0 PQ: 0 ANSI: 5
scsi 3:0:0:0: CD-ROM PIONEER DVD+-RW DR-K17Y 0.96 PQ: 0 ANSI: 5
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
firewire_core: created device fw0: GUID 424fc0002c5c09a1, S400
PM: Starting manual resume from disk
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
udev[862]: starting version 164
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
input: PC Speaker as /devices/platform/pcspkr/input/input1
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SBTN]
ACPI: Battery Slot [BAT0] (battery present)
acpi device:30: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:2d/LNXVIDEO:00/input/input5
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
ACPI: WMI: Mapper loaded
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7
input: Dell WMI hotkeys as /devices/virtual/input/input8
ACPI: AC Adapter [AC] (on-line)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Linux agpgart interface v0.103
r852 0000:03:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
r852: driver loaded succesfully
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
cfg80211: Calling CRDA to update world regulatory domain
b43-phy0: Broadcom 4311 WLAN found (core revision 10)
phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: b43-phy0::tx
Registered led device: b43-phy0::rx
Registered led device: b43-phy0::radio
Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[drm] Initialized drm 1.1.0 20060810
nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nouveau 0000:01:00.0: setting latency timer to 64
[drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x086700a2)
[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[drm] nouveau 0000:01:00.0: ... appears to be valid
[drm] nouveau 0000:01:00.0: BIT BIOS found
[drm] nouveau 0000:01:00.0: Bios version 60.86.45.00
[drm] nouveau 0000:01:00.0: TMDS table version 2.0
[drm] nouveau 0000:01:00.0: BIT table 'd' not found
[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00010034
[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000028
[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 010223f1 00c0c080
[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0000000e 00000000
[drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2
[drm] nouveau 0000:01:00.0: 0: 0x00000041: type 0x41 idx 0 tag 0xff
[drm] nouveau 0000:01:00.0: unknown type, using 0x40
[drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
[drm] nouveau 0000:01:00.0: 2: 0x00000310: type 0x10 idx 2 tag 0xff
[drm] nouveau 0000:01:00.0: 3: 0x00000311: type 0x11 idx 3 tag 0xff
[drm] nouveau 0000:01:00.0: 4: 0x00000313: type 0x13 idx 4 tag 0xff
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC42B
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC76B
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
alloc irq_desc for 41 on node -1
alloc kstat_irqs on node -1
HDA Intel 0000:00:1b.0: irq 41 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD1C0
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD2B2
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD4AC
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD511
[drm] nouveau 0000:01:00.0: 0xD511: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: Detected 128MiB VRAM
input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[TTM] Zone kernel: Available graphics memory: 436820 kiB.
[TTM] Zone highmem: Available graphics memory: 1816370 kiB.
[TTM] Initializing pool allocator.
[drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
[drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
composite sync not supported
[drm] nouveau 0000:01:00.0: allocated 1280x800 fb: 0x40230000, bo f68b1800
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 160x50
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
usb 2-2: device descriptor read/64, error -110
ehci_hcd 0000:00:1d.7: port 2 reset error -110
hub 2-0:1.0: hub_port_status failed (err = -32)
hub 2-0:1.0: unable to enumerate USB device on port 2
usb 2-6: new high speed USB device using ehci_hcd and address 3
usb 2-6: New USB device found, idVendor=05a9, idProduct=2640
usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-6: Product: Laptop Integrated Webcam
usb 2-6: Manufacturer: OmniVision Technologies, Inc. -2640-07.07.20.3
usb 5-2: new full speed USB device using uhci_hcd and address 2
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640)
uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input12
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
usb 5-2: New USB device found, idVendor=1234, idProduct=5678
usb 5-2: New USB device strings: Mfr=16, Product=32, SerialNumber=96
usb 5-2: Product: FUSB200
usb 5-2: Manufacturer: GENERIC INC.
usb 5-2: SerialNumber: 01234567890C
input: GENERIC INC. FUSB200 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input13
usbcore: registered new interface driver usbtouchscreen
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
Adding 7996k swap on /dev/sda1. Priority:-1 extents:1 across:7996k
EXT4-fs (sda7): re-mounted. Opts: (null)
EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
loop: module loaded
EXT4-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: errors=remount-ro
EXT4-fs (sda6): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: errors=remount-ro
IPv4 FIB: Using LC-trie version 0.409
fuse init (API version 7.15)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.15
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
ADDRCONF(NETDEV_UP): wlan0: link is not ready
alloc irq_desc for 42 on node -1
alloc kstat_irqs on node -1
tg3 0000:09:00.0: irq 42 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
NET: Registered protocol family 17
wlan0: authenticate with 00:21:91:d3:99:19 (try 1)
wlan0: authenticated
wlan0: associate with 00:21:91:d3:99:19 (try 1)
wlan0: RX AssocResp from 00:21:91:d3:99:19 (capab=0x431 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
usb 5-2: USB disconnect, address 2
usb 2-2: new high speed USB device using ehci_hcd and address 4
usb 2-2: New USB device found, idVendor=1234, idProduct=5678
usb 2-2: New USB device strings: Mfr=16, Product=32, SerialNumber=96
usb 2-2: Product: FUSB200
usb 2-2: Manufacturer: GENERIC INC.
usb 2-2: SerialNumber: 01234567890E
input: GENERIC INC. FUSB200 as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/input/input14
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-0): warning: maximal mount count reached, running e2fsck is recommended
EXT3-fs (dm-0): using internal journal
EXT3-fs (dm-0): mounted filesystem with writeback data mode
Back to top
mikhou
Status: Curious
Joined: 29 Nov 2010
Posts: 9
Reply Quote
Here's the result of "dmesg | tail -n20" on the Liquorix kernel.

mike@debian:~$ dmesg | tail -n20
usb 2-2: Product: FUSB200
usb 2-2: Manufacturer: GENERIC INC.
usb 2-2: SerialNumber: 01234567890E
input: GENERIC INC. FUSB200 as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/input/input14
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-0): warning: maximal mount count reached, running e2fsck is recommended
EXT3-fs (dm-0): using internal journal
EXT3-fs (dm-0): mounted filesystem with writeback data mode
exe (4159): /proc/4159/oom_adj is deprecated, please use /proc/4159/oom_score_adj instead.
usb 2-2: USB disconnect, address 4
usb 2-2: new high speed USB device using ehci_hcd and address 5
usb 2-2: New USB device found, idVendor=1234, idProduct=5678
usb 2-2: New USB device strings: Mfr=16, Product=32, SerialNumber=96
usb 2-2: Product: FUSB200
usb 2-2: Manufacturer: GENERIC INC.
usb 2-2: SerialNumber: 01234567890F
input: GENERIC INC. FUSB200 as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/input/input15
Back to top
mikhou
Status: Curious
Joined: 29 Nov 2010
Posts: 9
Reply Quote
Here's the output of "dmesg | tail -n20" with the stock kernel.


mike@debian:~$ dmesg | tail -n20
[ 72.505633] scsi5 : SCSI emulation for USB Mass Storage devices
[ 72.505917] usbcore: registered new interface driver usb-storage
[ 72.505924] USB Mass Storage support registered.
[ 72.507080] usb-storage: device found at 4
[ 72.507085] usb-storage: waiting for device to settle before scanning
[ 72.518098] usbcore: registered new interface driver usbtouchscreen
[ 77.506488] usb-storage: device scan complete
[ 77.507065] scsi 5:0:0:0: Direct-Access Generic Audio Product v2.0 PQ: 0 ANSI: 2
[ 77.508365] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 77.509714] sd 5:0:0:0: [sdb] 517632 4096-byte logical blocks: (2.12 GB/1.97 GiB)
[ 77.510234] sd 5:0:0:0: [sdb] Write Protect is off
[ 77.510241] sd 5:0:0:0: [sdb] Mode Sense: 20 00 00 00
[ 77.510247] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 77.515981] sd 5:0:0:0: [sdb] 517632 4096-byte logical blocks: (2.12 GB/1.97 GiB)
[ 77.523029] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 77.523200] sdb:
[ 77.527233] sd 5:0:0:0: [sdb] 517632 4096-byte logical blocks: (2.12 GB/1.97 GiB)
[ 77.527718] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 77.527728] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 78.271129] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Back to top
mikhou
Status: Curious
Joined: 29 Nov 2010
Posts: 9
Reply Quote
One other thing. I was looking through the thread to make sure that I had fully explained myself, and I wanted to make sure that everyone knew that I appreciate your help. My comment above about buying "name-brand if I could," could have been interpreted as me being snooty, and that certainly wasn't my intention. It's just true. I can rarely get name-brand items where I live and work. Thanks for your help, and I love my Liquorix kernel.

mikhou
Back to top
Display posts from previous:   
Page: 1, 2  Next
All times are GMT - 8 Hours