Page: 1, 2  Next

inxi beta and sensor
Posted: Jul 28, 09, 1:52 iotaka
 Status: Contributor
Joined: 13 Apr 2009
Posts: 85
Reply Quote
here some output:

Asus P5K SE
:: Code ::
sensors
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage:     +1.30 V  (min =  +0.85 V, max =  +1.60 V)
 +3.3 Voltage:     +3.28 V  (min =  +2.97 V, max =  +3.63 V)
 +5 Voltage:       +5.06 V  (min =  +4.50 V, max =  +5.50 V)
 +12 Voltage:     +12.26 V  (min = +10.20 V, max = +13.80 V)
CPU FAN Speed:    2376 RPM  (min =  600 RPM)
CHASSIS FAN Speed:   0 RPM  (min =  600 RPM)
POWER FAN Speed:  1196 RPM  (min =  600 RPM)
CPU Temperature:   +39.0°C  (high = +60.0°C, crit = +95.0°C)
MB Temperature:    +36.0°C  (high = +45.0°C, crit = +95.0°C)


ASUS M3A32-MVP Deluxe
:: Code ::
sensors
it8716-isa-0e80
Adapter: ISA adapter
VCore:       +1.18 V  (min =  +0.00 V, max =  +4.08 V)   
VDDR:        +3.33 V  (min =  +0.00 V, max =  +4.08 V)   
+3.3V:       +0.00 V  (min =  +0.00 V, max =  +4.08 V)   
+5V:         +4.97 V  (min =  +0.00 V, max =  +6.85 V)   
+12V:       +12.10 V  (min =  +0.00 V, max = +16.32 V)   
in5:         +0.00 V  (min =  +0.00 V, max =  +4.08 V)   
in6:         +0.00 V  (min =  +0.00 V, max =  +4.08 V)   
5VSB:        +6.85 V  (min =  +0.00 V, max =  +6.85 V)   
VBat:        +3.28 V
fan1:       1588 RPM  (min =    0 RPM)
fan2:          0 RPM  (min =    0 RPM)
fan3:          0 RPM  (min =    0 RPM)
fan4:          0 RPM  (min =    0 RPM)
fan5:          0 RPM  (min =    0 RPM)
temp1:       +43.0°C  (low  =  -1.0°C, high = +127.0°C)  sensor = thermistor
temp2:       +40.0°C  (low  =  -1.0°C, high = +127.0°C)  sensor = thermistor
temp3:       +42.0°C  (low  =  -1.0°C, high = +127.0°C)  sensor = thermistor
cpu0_vid:   +1.550 V


Asrock (for an AMD 939)
:: Code ::
sensors
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp:  +31.0°C

Back to top
Posted: Jul 28, 09, 10:28 iotaka
 Status: Contributor
Joined: 13 Apr 2009
Posts: 85
Reply Quote
Asus M2N32-SLI Deluxe

before sensors-detect
:: Code ::
sensors
acpitz-virtual-0             
Adapter: Virtual device       
temp1:       +40.0°C  (crit = +75.0°C)                 

k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp:  +44.0°C                                   
Core0 Temp:  +40.0°C                                   
Core1 Temp:  +46.0°C                                   
Core1 Temp:  +39.0°C                                   


after sensors-detect
:: Code ::
sensors
acpitz-virtual-0             
Adapter: Virtual device       
temp1:       +40.0°C  (crit = +75.0°C)                 

k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp:  +44.0°C                                   
Core0 Temp:  +40.0°C                                   
Core1 Temp:  +46.0°C                                   
Core1 Temp:  +39.0°C                                   

adt7475-i2c-0-2e
Adapter: SMBus nForce2 adapter at 1c00
in1:         +0.00 V  (min =  +0.00 V, max =  +2.99 V)   ALARM
in2:         +3.36 V  (min =  +0.00 V, max =  +4.38 V)       
fan1:          0 RPM  (min =    0 RPM)                       
fan2:          0 RPM  (min =    0 RPM)                       
fan3:          0 RPM  (min =    0 RPM)                       
fan4:          0 RPM  (min =    0 RPM)                       
temp1:       -64.0°C  (low  = -63.0°C, high = +191.0°C)  ALARM 
                      (crit = +100.0°C, hyst = +96.0°C)         
temp2:       +39.8°C  (low  = -63.0°C, high = +191.0°C)
                      (crit = +100.0°C, hyst = +96.0°C)
temp3:       -64.0°C  (low  = -63.0°C, high = +191.0°C)  ALARM
                      (crit = +100.0°C, hyst = +96.0°C)

it8716-isa-0290
Adapter: ISA adapter
in0:         +1.14 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
in1:         +0.00 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
in2:         +3.33 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
in3:         +2.86 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
in4:         +3.01 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
in5:         +3.60 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
in6:         +0.00 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
in7:         +2.80 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
Vbat:        +3.07 V
fan1:        983 RPM  (min =    0 RPM)
fan2:       1033 RPM  (min =    0 RPM)
fan3:          0 RPM  (min =    0 RPM)
temp1:       +41.0°C  (low  =  -1.0°C, high = +127.0°C)  ALARM  sensor = thermal diode
temp2:       +43.0°C  (low  =  -1.0°C, high = +127.0°C)  ALARM  sensor = thermistor
temp3:       +36.0°C  (low  =  -1.0°C, high = +127.0°C)  ALARM  sensor = thermistor
cpu0_vid:   +0.763 V

Back to top
Posted: Jul 28, 09, 14:49 techAdmin
 Status: Site Admin
Joined: 26 Sep 2003
Posts: 4127
Location: East Coast, West Coast? I know it's one of them.
Reply Quote
beta is now live as current stable: version 1.1.0

all new bugs will be handled as time permits, this now works for many systems, but it won't be exactly right all the time, but it will make a good guess.
Back to top
Posted: Jul 29, 09, 0:29 iotaka
 Status: Contributor
Joined: 13 Apr 2009
Posts: 85
Reply Quote
Asus P5K SE after sensors-detect remember to answr YES to scan isa (and /etc/init.d/module-init-tools start)

:: Code ::
sensors
atk0110-acpi-0                     
Adapter: ACPI interface             
Vcore Voltage:     +1.30 V  (min =  +0.85 V, max =  +1.60 V)
 +3.3 Voltage:     +3.28 V  (min =  +2.97 V, max =  +3.63 V)
 +5 Voltage:       +5.06 V  (min =  +4.50 V, max =  +5.50 V)
 +12 Voltage:     +12.26 V  (min = +10.20 V, max = +13.80 V)
CPU FAN Speed:    2376 RPM  (min =  600 RPM)               
CHASSIS FAN Speed:   0 RPM  (min =  600 RPM)               
POWER FAN Speed:  1196 RPM  (min =  600 RPM)               
CPU Temperature:   +39.0°C  (high = +60.0°C, crit = +95.0°C) 
MB Temperature:    +37.0°C  (high = +45.0°C, crit = +95.0°C) 

coretemp-isa-0000
Adapter: ISA adapter
Core 0:      +49.0°C  (high = +82.0°C, crit = +100.0°C) 

coretemp-isa-0001
Adapter: ISA adapter
Core 1:      +49.0°C  (high = +82.0°C, crit = +100.0°C) 

coretemp-isa-0002
Adapter: ISA adapter
Core 2:      +43.0°C  (high = +82.0°C, crit = +100.0°C) 

coretemp-isa-0003
Adapter: ISA adapter
Core 3:      +47.0°C  (high = +82.0°C, crit = +100.0°C)

w83627dhg-isa-0290
Adapter: ISA adapter
Vcore:       +1.30 V  (min =  +0.00 V, max =  +1.74 V)
in1:         +1.75 V  (min =  +1.18 V, max =  +0.16 V)   ALARM
AVCC:        +3.28 V  (min =  +0.26 V, max =  +0.56 V)   ALARM
VCC:         +3.28 V  (min =  +0.54 V, max =  +0.03 V)   ALARM
in4:         +1.43 V  (min =  +1.57 V, max =  +0.00 V)   ALARM
in5:         +1.69 V  (min =  +0.54 V, max =  +0.32 V)   ALARM
in6:         +1.50 V  (min =  +1.34 V, max =  +0.02 V)   ALARM
3VSB:        +3.28 V  (min =  +0.00 V, max =  +2.19 V)   ALARM
Vbat:        +3.28 V  (min =  +0.22 V, max =  +0.77 V)   ALARM
fan1:       1196 RPM  (min = 1147 RPM, div = 8)
fan2:       2376 RPM  (min = 42187 RPM, div = 4)  ALARM
fan3:          0 RPM  (min =  292 RPM, div = 64)  ALARM
fan5:          0 RPM  (min = 8653 RPM, div = 2)  ALARM
temp1:       +37.0°C  (high = -128.0°C, hyst = +65.0°C)  sensor = thermistor
temp2:       +39.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = diode
temp3:       +16.5°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor

Back to top
Posted: Jul 29, 09, 12:54 techAdmin
 Status: Site Admin
Joined: 26 Sep 2003
Posts: 4127
Location: East Coast, West Coast? I know it's one of them.
Reply Quote
thanks for the data samples, I have now finished inxi 1.1.1, which is the reworked logic that should work for all these cases posted here.

If it fails to do it correctly, post the output from sensors again, if different than above.

Core logic totally dynamic now, and shows two types of fans depending on data type: sys-x or fan-x, fan-x is the generic default type most sensors show, sys is from cpu/mobo/psu/system type explicitly labeled fans
Back to top
Posted: Jul 29, 09, 23:48 iotaka
 Status: Contributor
Joined: 13 Apr 2009
Posts: 85
Reply Quote
Asus eeepc 901

:: Code ::
sensors
acpitz-virtual-0
Adapter: Virtual device
temp1:       +55.0°C  (crit = +90.0°C)                 

eeepc-virtual-0
Adapter: Virtual device
fan1:       1590 RPM

Back to top
Posted: Jul 30, 09, 3:59 deach
 Status: Contributor
Joined: 08 Sep 2008
Posts: 66
Reply Quote
do I need to install something else to get this to work?
:: Code ::
kb9klc@siduxbox:~$ sensors
bash: sensors: command not found

Back to top
Posted: Jul 30, 09, 4:04 iotaka
 Status: Contributor
Joined: 13 Apr 2009
Posts: 85
Reply Quote
:: deach wrote ::
do I need to install something else to get this to work?
:: Code ::
kb9klc@siduxbox:~$ sensors
bash: sensors: command not found


:: Code ::
apt-get install lm-sensors


To improve perform also this:
:: Code ::
sensors-detect

some time the default options is not the best choice during the configuration process.
Back to top
Posted: Jul 30, 09, 4:08 iotaka
 Status: Contributor
Joined: 13 Apr 2009
Posts: 85
Reply Quote
Asrock (for an AMD 939) after sensors-detect
:: Code ::
sensors                           
k8temp-pci-00c3                                           
Adapter: PCI adapter
Core0 Temp:  +31.0°C

w83627ehf-isa-0290
Adapter: ISA adapter
Vcore:       +1.10 V  (min =  +0.00 V, max =  +1.74 V)
in1:         +1.11 V  (min =  +2.04 V, max =  +2.02 V)   ALARM
AVCC:        +3.28 V  (min =  +0.58 V, max =  +1.50 V)   ALARM
VCC:         +3.28 V  (min =  +4.03 V, max =  +3.06 V)   ALARM
in4:         +1.67 V  (min =  +1.01 V, max =  +1.53 V)   ALARM
in5:         +1.66 V  (min =  +1.33 V, max =  +2.04 V)
in6:         +1.86 V  (min =  +0.69 V, max =  +1.50 V)   ALARM
3VSB:        +3.26 V  (min =  +4.08 V, max =  +2.86 V)   ALARM
Vbat:        +3.14 V  (min =  +2.16 V, max =  +2.54 V)   ALARM
in9:         +1.59 V  (min =  +1.97 V, max =  +1.46 V)   ALARM
fan1:          0 RPM  (min =  760 RPM, div = 16)  ALARM
fan2:       2636 RPM  (min = 5443 RPM, div = 8)  ALARM
fan3:          0 RPM  (min =  897 RPM, div = 16)  ALARM
fan5:          0 RPM  (min =    0 RPM, div = 16)
temp1:       +33.0°C  (high = -13.0°C, hyst = +123.0°C)  sensor = thermistor
temp2:       +34.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
temp3:       +34.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
cpu0_vid:   +0.000 V

Back to top
Posted: Jul 30, 09, 4:33 deach
 Status: Contributor
Joined: 08 Sep 2008
Posts: 66
Reply Quote
:: iotaka wrote ::
:: deach wrote ::
do I need to install something else to get this to work?
:: Code ::
kb9klc@siduxbox:~$ sensors
bash: sensors: command not found


:: Code ::
apt-get install lm-sensors


To improve perform also this:
:: Code ::
sensors-detect

some time the default options is not the best choice during the configuration process.


Thanks I guess for some reason my box isn't detecting any sensors. Headed off to work now but I'll try more later. Thanks
Back to top
Display posts from previous:   
Page: 1, 2  Next
All times are GMT - 8 Hours
Contact Us
Hosting: Pair Networks: 0.084
Forum Style © techpatterns.com
info

tech forums